Salamander Ct Force 3.00 Bar Twin Brass End Shower Pump Positive CTFORCE30PT

Plumbworld

Additional information: CT Force 30PT is only suitable for positive head, gravity fed systems. Installing in a negative head system will mean the pump may not work. Shower Individual Outlet Bathroom Whole House Pump Type Positive Head Twin Hot & ColdCT Force twin ended, positive pumps will boost the water pressure to a range of outlets including: Toilet Wash Basin Thermostatic Mixer Shower Drench Shower Head With homes getting more technologically advanced consumers are finding that appliances are requiring higher pressures in order to operate. This could potentially cause you a problem if you have lower water pressure. A solution to this problem could be a Salamander shower pump. They are designed to boost pressure in both the hot and cold water supplies to thermostatic or manual mixer valves. They are also suitable for use with a large range of shower types and accessories such as heads. Positive Head Positive head shower pumps are for gravity-fed systems only. As a rule, if your cold-water tank is above the shower (maybe you have a shower in a converted room downstairs) and you have a flow rate as little as 0.5 bar, then you will need a positive head shower pump. Twin Impeller Shower Pump Twin pumps are designed using the highest standard of technology to boost your water pressure of both hot and cold water supply to a single shower, bath, shower mixer or mixer tap. Put a stop to low water pressure with this pump. It is perfect for transforming your unsatisfactory shower into a powerful and invigorating shower that you'll never want to leave. Powerful noise reducing technology It’s no surprise that shower pumps can be on the noisy side considering the job that they do. That being said, they don’t have to be, providing they’re designed with noise reduction in mind. Salamander pumps are exactly that, featuring noise and vibration reducing feet which work in perfect sync with the natural vibration of the motor. Also, the materials used within the pump are capable of dampening the vibration of rotating parts, reducing noise further. Solid state switching Solid State Switching is the activation system used within Salamander shower pumps. Where other pumps rely upon moving parts within them to activate, the new solid state switching from Salamander uses an electronically operated switch with no moving parts, thus improving the reliability, the sensitivity, and the overall product life. Compact size Salamander are champions when it comes to producing small yet powerful shower pumps. This is not only great for an installer but you too, allowing you to fit and operate it in smaller than normal areas. Size really does matter when it comes to shower pumps and flexible installations. Silent ShoweringQuiet Mark approved means when the water is running you won't hear the pump operating - making it perfect for early morning and late night shower users! Continuously Rated Motor Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening. A pump that isn’t continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower. Brass ended When it comes to shower pumps you want something that’s going to last, especially if you’re fitting it underneath a bath or at the back of an airing cupboard. That’s why the components need to be reliable, and you don’t get much more reliable in the bathroom than brass. These Salamander pumps feature heavy duty brass ends designed to give you year after year of total reliability. 5-year guaranteeHigh-quality parts and precision engineering put these products together and we want you to be confident of that, so to put your mind at ease we cover you with a 5-year long guarantee. Flexible hoses included This shower pump comes complete with 4 x 15mm to 22mm Straight Pushfit Couplers Brass Nut (with Isolating Valve), which are used to link your shower pump to both incoming and outgoing water pipes. These hoses lmit the transfer of vibration from the motor and pump to the associated pipe work, helping to reduce noise and prevent damage to the pump itself. WRAS Approved for qualityIf you’re buying any sort of water fitting or product then it’s important that its WRAS (Water Regulations Advisory Scheme) approved. It’s the best way to work out if that particular product or part complies with the UK requirements for installation within the UK.

National Shower Spares

Salamander CT Force 30PT 3.0 Bar Twin Impeller Positive Shower Pump. The Salamander CT Force shower pumps take the standard Salamander CT range to the next level. With brass impeller ends, they are a sign of high quality, extra performance, and innovative internal technology. An ideal replacement for the Stuart Turner Monsoon 3.0 bar twin impeller positive shower pump (46416). Maximum pressure rating (closed head) 3.0 bar. Pressure rating (8 litres/minute) 2.5 bar. Suitable for positive head installations only. For gravity fed water systems only. Twin impellers for boosting both hot and cold water supplies simultaneously. Brass ended impellers for added robustness, luxury, and higher quality. Continuously rated induction motor with even better efficiency. Regenerative impeller motor. Carbon seals. 22mm push-fit flexi connectors. Supplied with AV couplers. Compact size 160mm x 120mm x 216.20mm (H x W x D). Weight 6.37kg. Noise and vibration reduction with very minimal background noise, including special anti-vibration feet. You can also purchase an anti-vibration pump mat as an optional extra. Ideal for boosting conventional, multi-function, and advanced spray showers (multiple outlets at a time supported). Salamander Motor Pump Integration technology: compact size, aids cooling, and longer life. Salamander Solid State Switching technology: reliable, consistent, and fast switch on. 5 year manufacturer's guarantee. WRAS approved. Installation guide included. The Salamander CT Range does not necessarily need a flange, provided that the pump is installed at the base of the hot water cylinder, the cold-water tank is higher than 1.2m above the cylinder, and the pump is ‘teed’ off the first downward leg from the cylinder. If this is not the case, see the Salamander 22mm S-Flange. Genuine brand new Salamander product, covered by a Salamander manufacturer's guarantee.

ManoMano

General description Do you suffer from an underperforming shower with painfully low pressure? The Salamander CTFORCE30PT twin impeller pump is the perfect addition to your bathroom or ensuite, providing a considerable upgrade at an affordable price. Designed to boost both hot and cold water supplies, this pump can operate individually or simultaneously, making it ideally suited for gravity-fed water systems. It enhances the performance of showers and mixers, delivering even pressure for efficient mixing capabilities. Technical specifications Maximum head: 100 ft (3.0 bar) Noise level: 52.5 dBA Power: 4.0 amps / 960 watts (maximum) Continuously rated Pre-wired with 1.25 metre power cable Installation For optimal performance, it is recommended to install the pump near the base of the hot water cylinder. The pump is activated by the flow of water, typically around 1 litre per minute per side, making installation straightforward. Usage The Salamander CTFORCE30PT is designed to enhance the