Salamander Pumps CT60 Bathroom Universal Pump 1.8 Bar Pressure Twin End Suitable for All (+ or ) Gravity Fed Systems WRAS Approved

Plumbworld

Technical Features:Closed head pressure: 1.8 barMax amps/watts: 2.10ARating: ContinuousSuitable for positive and negative head installations onlyAdditional information:Suitable for boosting the hot and cold water pressure to the outlets within a bathroom, including showers, baths, basins and toilets, CT60BU has been specifically designed to meet the demand for water within bathrooms, ensuites and utility rooms.The CT60BU is suitable for positive and negative head, gravity fed systems. Shower Individual outlet bathroom Pump type Positive head Negative head Twin hot & coldThe CT Bathroom twin ended, universal (negative head) pumps will boost the water pressure to outlets throughout the bathroom including: Toilet Wash basin Dishwasher Washing machine Thermostatic mixer shower Multi-function shower head Body jets What are the most important features a shower pump needs? It has to be quiet, it has to be hidden out of sight and it has to boost your shower pressure for a brilliantly powerful shower. The CT60BU from Salamander is all of this rolled into one. Powerful noise reducing technology It’s no surprise that shower pumps can be on the noisy side considering the job that they do. That being said, they don’t have to be, providing they’re designed with noise reduction in mind. Salamander pumps are exactly that, featuring noise and vibration reducing feet which work in perfect sync with the natural vibration of the motor. Also, the materials used within the pump are capable of dampening the vibration of rotating parts, reducing noise further. Solid state switching Solid State Switching is the activation system used within Salamander shower pumps. Where other pumps rely upon moving parts within them to activate, the new solid state switching from Salamander uses an electronically operated switch with no moving parts, thus improving the reliability, the sensitivity, and the overall product life. Compact size Salamander are champions when it comes to producing small yet powerful shower pumps. This is not only great for an installer but you too, allowing you to fit and operate it in smaller than normal areas. Size really does matter when it comes to shower pumps and flexible installations. Crossover This pump features an innovatively designed bypass tube which diverts the water from the end of the pump that isn’t pumping water. This can happen when one tap is switched off when a bath or basin is being filled, so the crossover is there to stop the expansion from overheating on the side of the pump which doesn’t contain any water. Twin Impeller Shower Pump Twin pumps are designed using the highest standard of technology to boost your water pressure of both hot and cold water supply to a single shower, bath, shower mixer or mixer tap. Put a stop to low water pressure with this pump. It is perfect for transforming your unsatisfactory shower into a powerful and invigorating shower that you'll never want to leave. Universal Pump This universal pump is suitable for use with both a positive or negative head. It boosts water pressure for gravity fed hot water systems, giving you the perfect shower each and every day. Silent ShoweringQuiet Mark approved means when the water is running you won't hear the pump operating - making it perfect for early morning and late night shower users! Continuously Rated Motor Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening. A pump that isn’t continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower. 3-Year GuaranteeWhen buying anything for your home you need to know that it's going to stand the test of time. This is why this product comes with a fantastic 3-year guarantee against any manufacturing defects should the worst happen and the product is not up to standard. Flexible hoses included This shower pump comes complete with 4 x 15mm to 22mm Straight Pushfit Couplers (with Isolating Valve), which are used to link your shower pump to both incoming and outgoing water pipes. These hoses lmit the transfer of vibration from the motor and pump to the associated pipe work, helping to reduce noise and prevent damage to the pump itself. WRAS Approved for qualityIf you’re buying any sort of water fitting or product then it’s important that its WRAS (Water Regulations Advisory Scheme) approved. It’s the best way to work out if that particular product or part complies with the UK requirements for installation within the UK.

National Shower Spares

Salamander CT60BU 1.8 bar twin impeller universal bathroom pump. The Salamander CT Bathroom range, with increased pressure performance and additional features, has been specifically engineered to meet the increased demands for water supply within your en-suite, bathroom, or utility room. With their advanced design features, this new range of single and twin ended pumps will quietly and efficiently boost the hot or cold water supplies to showers, baths, basins, toilets, and household appliances. Maximum pressure rating (closed head) 1.8 bar. Pressure rating (8 litres/minute) 1.5 bar. Suitable for positive or negative head (universal) installations. For gravity fed water systems only. Twin impellers for boosting both hot and cold water supplies simultaneously. Continuously rated induction motor with even better efficiency. Regenerative impeller motor. Carbon seals. 15mm push-fit flexi connectors. Compact size 315mm x 125mm x 185mm (H x W x L). Weight 4.32kg. Noise and vibration reduction with very minimal background noise, including special anti-vibration feet. You can also purchase an anti-vibration pump mat as an optional extra. Salamander Crossover technology: allows for whole bathroom use and individual outlet operations. Salamander Motor Pump Integration technology: compact size, aids cooling, and longer life. Salamander Solid State Switching technology: reliable, consistent, and fast switch on. 3 year manufacturer's guarantee, which can be extended to 5 years with Salamander PumpWise registration. WRAS approved. Installation guide included. The Salamander CT Range does not necessarily need a flange, provided that the pump is installed at the base of the hot water cylinder, the cold-water tank is higher than 1.2m above the cylinder, and the pump is ‘teed’ off the first downward leg from the cylinder. If this is not the case, see the Salamander 22mm S-Flange. Genuine brand new Salamander product, covered by a Salamander manufacturer's guarantee.

ManoMano

What are the most important features a needs? It has to be quiet, it has to be hidden out of sight and it has to boost your shower pressure for a brilliantly powerful shower. The CT60BU from is all of this rolled into one. Powerful noise reducing technology It’s no surprise that shower pumps can be on the noisy side considering the job that they do. That being said, they don’t have to be, providing they’re designed with noise reduction in mind. are exactly that, featuring noise and vibration reducing feet which work in perfect sync with the natural vibration of the motor. Also, the materials used within the pump are capable of dampening the vibration of rotating parts, reducing noise further. Solid state switching Solid State Switching is the activation system used within . Where other pumps rely upon moving parts within them to activate, the new solid state switching from Salamander uses an electronically operated switch with no moving parts, thus improving the reliability, the

City Plumbing

Positive head bathroom pump, specifically engineered to meet the increased demands for water supply within en-suites, bathrooms or utility rooms. Crossover technology allows for individual outlet operation.