Salamander Pumps CT80 Bathroom Pump 2.6 Bar Pressure Twin End Suitable for Positive Head, Gravity Fed Systems Only WRAS Approved

Plumbworld

Additional information:Suitable for boosting the hot and cold water pressure to the outlets within a bathroom, including showers, baths, basins and toilets, CT80B has been specifically designed to meet the demand for water within bathrooms, ensuites and utility rooms.The CT80B is only suitable for a positive head, gravity fed system. Installing a in a negative head system will mean the pump may not work.ShowerIndividual outletBathroomPump typePositive headTwin hot & coldThe CT Bathroom twin ended, positive pumps will boost the water pressure to outlets throughout the bathroom including: Toilet Wash basin Thermostatic mixer shower Drench shower head With homes getting more technologically advanced consumers are finding that appliances are requiring higher pressures in order to operate. This could potentially cause you a problem if you have lower water pressure. A solution to this problem could be a Salamander shower pump. They are designed to boost pressure in both the hot and cold water supplies to thermostatic or manual mixer valves. They are also suitable for use with a large range of shower types and accessories such as heads. Twin Impeller Shower Pump Twin pumps are designed using the highest standard of technology to boost your water pressure of both hot and cold water supply to a single shower, bath, shower mixer or mixer tap. Put a stop to low water pressure with this pump. It is perfect for transforming your unsatisfactory shower into a powerful and invigorating shower that you'll never want to leave. Positive Head A positive head shower pump is designed to be gravity fed, therefore it needs a 'head' of distance (at least a metre) between the pump and the bottom of the cold water cistern. The gravity feed 'kick-starts' the pump, pushing water straight through to your shower.  Positive Head Positive head shower pumps are for gravity-fed systems only. As a rule, if your cold-water tank is above the shower (maybe you have a shower in a converted room downstairs) and you have a flow rate as little as 0.5 bar, then you will need a positive head shower pump. Powerful noise reducing technology It’s no surprise that shower pumps can be on the noisy side considering the job that they do. That being said, they don’t have to be, providing they’re designed with noise reduction in mind. Salamander pumps are exactly that, featuring noise and vibration reducing feet which work in perfect sync with the natural vibration of the motor. Also, the materials used within the pump are capable of dampening the vibration of rotating parts, reducing noise further. Solid state switching Solid State Switching is the activation system used within Salamander shower pumps. Where other pumps rely upon moving parts within them to activate, the new solid state switching from Salamander uses an electronically operated switch with no moving parts, thus improving the reliability, the sensitivity, and the overall product life. Compact size Salamander are champions when it comes to producing small yet powerful shower pumps. This is not only great for an installer but you too, allowing you to fit and operate it in smaller than normal areas. Size really does matter when it comes to shower pumps and flexible installations. Crossover This pump features an innovatively designed bypass tube which diverts the water from the end of the pump that isn’t pumping water. This can happen when one tap is switched off when a bath or basin is being filled, so the crossover is there to stop the expansion from overheating on the side of the pump which doesn’t contain any water. Silent ShoweringQuiet Mark approved means when the water is running you won't hear the pump operating - making it perfect for early morning and late night shower users! Continuously Rated Motor Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening. A pump that isn’t continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower. 3-Year GuaranteeWhen buying anything for your home you need to know that it's going to stand the test of time. This is why this product comes with a fantastic 3-year guarantee against any manufacturing defects should the worst happen and the product is not up to standard. Flexible hoses included This shower pump comes complete with 4 x 15mm to 22mm Straight Pushfit Couplers (with Isolating Valve), which are used to link your shower pump to both incoming and outgoing water pipes. These hoses lmit the transfer of vibration from the motor and pump to the associated pipe work, helping to reduce noise and prevent damage to the pump itself. WRAS Approved for qualityIf you’re buying any sort of water fitting or product then it’s important that its WRAS (Water Regulations Advisory Scheme) approved. It’s the best way to work out if that particular product or part complies with the UK requirements for installation within the UK.

Amazon

SALAMANDER CT80 BATHROOM PUMP: The CT80 Bathroom pump from Salamander Pumps is designed to meet the increased demands for water supply within bathrooms, en-suites, and utility rooms, with twin hot and cold boosting. This pump is a 2.6 bar twin regenerative pump suitable for boosting both hot and cold water pressure to a bathroom, ensuite, or utility room, in a gravity fed, positive head system. WRAS approved and has a 3 year warranty CT BATHROOM RANGE: The CT Bathroom pump range has been specifically engineered to meet the increased demands for water supply within bathrooms, en-suites, and utility rooms. These pumps are only suitable for a gravity-fed system, with pumps available in both positive and negative (universal) heads. Using regenerative impeller technology, the CT Bathroom range offers compact designs with a continuously rated motor - perfect for boosting a bathroom. GRAVITY FED SYSTEM: The CT80 Bathroom is only compatible with gravity fed systems, which means a system in which there is a hot water cylinder in an airing cupboard and a large cold water tank in the loft. It is important to choose a pump that is compatible with the system in your home, as incorrect selection can mean the pump will not work. SUITABLE FOR USE WITH BATHROOM, EN-SUITE, OR UTILITY ROOM: When selecting the right pump for your home, it is important to note that you can go up the range, but never down. For instance, a whole home pump (e.g. CTForce 30PT) can power a shower alone, but a shower only pump (e.g. CT50 Xtra) can NOT power a cistern, taps, whole house etc. The CT80 Bathroom pump is compatible with a whole bathroom, such as a shower, bath, cistern, wash basin, and tap, to boost both hot and cold water. 1.8 BAR PRESSURE: The CT60 Universal Bathroom pump offers 1.8 bar pressure, which is enough to boost water pressure to a bathroom or utility room. With Crossover Technology(TM) to power hot and cold supplies, CT Bathroom is the pump of choice for bathroom installations., Weight: 13.22773572 pounds, Manufacturer: Salamander Pumps

National Shower Spares

Salamander CT80B 2.6 Bar Twin Impeller Positive Bathroom Pump. The Salamander CT Bathroom range, with increased pressure performance and additional features, has been specifically engineered to meet the increased demands for water supply within your en-suite, bathroom, or utility room. With their advanced design features, this new range of single and twin ended pumps will quietly and efficiently boost the hot or cold water supplies to showers, baths, basins, toilets, and household appliances. Maximum pressure rating (closed head) 2.6 bar. Pressure rating (8 litres/minute) 2.4 bar. Suitable for positive head installations only. For gravity fed water systems only. Twin impellers for boosting both hot and cold water supplies simultaneously. Continuously rated induction motor with even better efficiency. Regenerative impeller motor. Carbon seals. Comes with 22mm push-fit flexi connectors. Compact size 160mm x 120mm x 213mm (H x W x D). Weight 5.32kg. Noise and vibration reduction with very minimal background noise, including special anti-vibration feet. You can also purchase an anti-vibration pump mat as an optional extra. Salamander Crossover technology: allows for whole bathroom use and individual outlet operations. Salamander Motor Pump Integration technology: compact size, aids cooling, and longer life. Salamander Solid State Switching technology: reliable, consistent, and fast switch on. 3 year manufacturer's guarantee, which can be extended to 5 years with Salamander PumpWise registration. WRAS approved. Installation guide included. The Salamander CT Range does not necessarily need a flange, provided that the pump is installed at the base of the hot water cylinder, the cold-water tank is higher than 1.2m above the cylinder, and the pump is ‘teed’ off the first downward leg from the cylinder. If this is not the case, see the Salamander 22mm S-Flange. Genuine brand new Salamander product, covered by a Salamander manufacturer's guarantee.

ManoMano

With homes getting more technologically advanced consumers are finding that appliances are requiring higher pressures in order to operate. This could potentially cause you a problem if you have lower water pressure. A solution to this problem could be a shower pump. They are designed to boost pressure in both the hot and cold water supplies to thermostatic or manual mixer valves. They are also suitable for use with a large range of shower types and accessories such as heads. Twin Impeller Pump Twin pumps are designed using the highest standard of technology to boost your water pressure of both hot and cold water supply to a single shower, bath, shower mixer or mixer tap. Put a stop to low water pressure with this pump. It is perfect for transforming your unsatisfactory shower into a powerful and invigorating shower that you'll never want to leave. Positive Head A positive head shower pump is designed to be gravity fed, therefore it needs a 'head' of distance (at least a metre) between