SALEWA Litetrek Pro Iii Tent, Lightgrey/Mango, UNISEX

Salewa Litetrek Pro Iii Tent. Brave the alpine with the SALEWA Litetrek Pro III, a 3-person tent engineered for lightweight trekking. Its 100% self-supporting, semi-geodesic design offers exceptional wind stability (tested to 90 km/h) and pitches easily on any terrain. This double-wall, 3-season shelter boasts a highly waterproof, tear-resistant fly and floor for total weather protection. Enjoy a fast, one-pitch setup, smart ventilation, and a versatile vestibule for gear or cooking. When weight, pack size, and reliability are key, the Litetrek Pro III is your fortress in the mountains. This ultralight 2-person tent is perfect for hiking and backpacking. Its high-quality design features strong, lightweight materials for excellent wind and rain resistance. Praised for its quick, easy, one-person setup, this stable 3-season tent is surprisingly spacious, with ample room for two people and gear. A top choice for those seeking a lightweight, high-performance shelter that packs down small. The Litetrek Pro III is a 3-person, double wall tent, designed for lightweight trekking in alpine terrain, where protection against severe weather, wind stability, light weight and compact pack size are key. Its three-season spec is optimised for use during the milder months of the year. Wind-tunnel tested for stability at 90 km/h by the Technical University of Munich.Its robust, reliable semi-geodesic, double wall construction enables full use of space and ensures an optimal balance of weather protection and ventilation. The 100% self-supporting design means that you can pitch without problem on rocky terrain, or at alpine sites where there is not enough space to set up with guy lines and pegs. Alternatively, the anchor points can be extended for more flexibility, for example on snowy terrain. Its tear-resistant 20D ripstop nylon flysheet is silicone- and PU-coated to give it a 3,000 mm water column, the floor is made of robust PU-coated 40D ripstop nylon that gives a 10,000 mm water column, while the 66D ripstop polyester inner tent has a mesh and mosquito net entrance. Ventilation is regulated via a rear panel with zippers (which can be operated from both inside and outside) allowing you to adjust the fresh air supply and prevent humidity.In addition, our 3S Speed Set Up Solution with short, flat sleeves and hooks allows you to set up fast and effectively in one pitch. And in good weather or on fine nights, you can go minimalist and pitch the flysheet on its own. What really sets the Litetrek Pro III apart is its versatility – check out the weatherproof vestibule for gear storage and cooking, which is integrated into the inner tent, or can be extended as required.Features:- Footprint available- Repair set- Door Storage Pockets- Different door opening options- Zipper with anti-catch flap- Nylon hooks for fixing the fly even in cold conditions- Extendable and replaceable anchor points- Cord locks- Extended guy line webbing- Reinforced Hypalon sleeve finishing- Vestibule extension solution- 100% Self supporting constructionSpecifications:- Area Inner Tent: 3 m²- Area Vestibules Front: 1 m²- Entrances: 1- Height Inner Tent: 1 m- Persons: 3 Persons- Ventilations: 1- Ventilation type: Ventilation panel with zippers- Vestibules: 1- Vestibule for gear storage and cooking- Weight Max: 2420 g- Weight Min: 2100 gMaterials:- Pole diameter: 9 mm- Poles: 7001 T6 ultralight Aluminium- Tent construction: Semi geodesic double wall- Floor: Innertent: 20D Nylon Ripstop with mesh and mosquito net entrance Innertent- Fly: Coating Fly Sheet: silicone/PU coated Coating Fly Sheet- Guy lines: Reflective Dyneema- Pegs: Y-Pegs Aluminium 14,5 cm- Wind Protection: Minimum 90 km/h windspeed approved in the windchannel of Technical University of Munich- Water column Floor: 10000 mm- Water column Fly: 3000 mm. tradeinn Trekkinn

100% Self supporting construction Vestibule Extension solution Reinforced Hyperon sleeve finishing