Seyxicnor T-Splitter Extension Cable Permanent Outdoor Lights Pro IP68 Waterproof 3-Strand Y-Splitter with +/- Identification for Flexible Central or Branch Layouts, Cuttable & Spliceable

Package Contents: T-type splitter body × 1, strong adhesive backing (for fixing) × 3, waterproof junction box × 3, mounting screws (several), instruction manual × 1, screwdriver × 1 Compatible Equipment: Designed specifically for Seyxicnor brand permanent outdoor LED strips, ensuring stable signal and power transmission, compatible with the brand's entire range of permanent outdoor LED strips. Function: The T-type splitter allows for cutting and connection at any point on the LED strip, splitting a single main LED strip into two independent branches. Its right-angle (T-shaped) structure is particularly suitable for scenarios requiring neat routing and 90° branching, such as eaves corners, fence seams, or roof centerlines. It is suitable for both centrally symmetrical layouts (such as extending from the center of the roof to both sides) and general branching layouts. After connection, the two branches can be controlled independently or operate synchronously without affecting overall brightness and color consistency. How to Use: 1. Determine the location where the LED strip needs to branch, and cut the strip at that point using wire cutters. 2. Strip 1cm of insulation from the head of the LED strip. 2. Connect the two ends of the cut LED strip (main wire end and branch wire end) to the corresponding input/output ports of the T-type splitter through the junction box (note that the polarity markings and arrow directions on the wires should be consistent). 3. Connect the third branch wire (if needed) to the side outlet of the splitter to complete the "one in, two out" circuit connection. 4. Close the junction box cover