Sika SikaMur InjectoCream 100 Injectable Damp Proof Course Silane Based Rising Treatment Ready To Use Mess Free 300ml, Packaging May Vary

SikaMur InjectoCream-100 is a new concept for the control of rising damp. SikaMur InjectoCream-100 is a water repellent cream packed in a 560 ml sausage or 300 ml cartridge. It is inserted into a series of holes drilled into a mortar course of the masonry by means of a simple application gun - no special injection pump required. Once injected into the mortar course SikaMur InjectoCream-100 will diffuse within the damp wall to form a Damp Proof Course (DPC) will allow the wall to dry and block future rising damp. SikaMur InjectoCream-100 complies with the requirements of WTA Guideline 4-4-04/D Injection of masonry in order to avoid capillary moisture content. Silane-based injectable Damp Proof Course (DPC) for rising damp treatment SikaMur InjectoCream-100 can be used to treat rising damp in almost all types of masonry walls: Solid brick walls.Cavity walls.Random form stone and rubble infill walls etc. Easy to install (low risk for operative error not so dependent on operative skills).1-component ready to use.Fast to install (no double drilling no waiting for liquid to penetrate under pressure or gravity). No need for preliminary watertight sealing around the injection holes (as with pressure systems).Fast to inject (no waiting times required to pump in the material compared to pressure injection systems and no refilling as with gravity fed injection systems).Consistent application rate (easy to calculate the amount of material that will be required). Does not require a special expensive pump.Spillage & mess virtually eliminated from the site (no problem with fluids flooding through party walls cavities or service ducts).Concentrated formula with approx. 80 % active ingredients (introduces a lower quantity of inactive carrier into the wall - much more effective results compared to less concentrated materials).Low hazard water based - non-caustic non-flammable - not injected under pressure.Very low wastage.Low waste disposal.No risk of increased efflorescence (as with siliconate rising damp treatments). PTDSIKDIR425016

EASY TO APPLY – This ready-to-use, fast installation, 1-component Sika damp proofing course is a low-risk and low-wastage treatment for rising damp. CONSISTENT APPLICATION – Designed for use with a standard applicator gun to facilitate consistency and reduce the need for new equipment. CONCENTRATED FORMULA – Virtually mess-free and measured application results in minimal spillages, with no chance of fluids flooding through part walls, cavities or service ducts. SAFE TO USE – Formulated using a water base with hazard-free, non-caustic ingredients, it results in a non-flammable mixture with a reduced risk of efflorescence. EASY APPLICATION - 300ml Cartridge fits any standard or large cartridge applicator gun, 600ml foil pack suitable for use in any foil pack application gun.