Solar Bird Trade Quality Panel Proofing Mesh Clips, No Drill Reusable Fixings for Pigeon Deterrent Wire Mesh, with Push Washers & Locking Nuts (20)

TRADE QUALITY SOLAR PANEL MESH CLIPS: Designed to secure bird proofing wire mesh around the edges of a solar panel array. The clip holds the mesh close to the panel frame to help form a tidy barrier against birds accessing the space beneath the panels. NON-PENETRATING FITTING: The 20mm clip head fits beneath the solar panel frame, with the threaded shaft extending outwards through the mesh. Installation does not require drilling into the panel frame. Check your panel edge and frame profile for a suitable fit before ordering. REMOVABLE FOR MAINTENANCE: The threaded fitting allows the mesh to be released and refitted when access to the panels is needed for cleaning, inspection or maintenance. Suitable for installers who want an adjustable, reusable fixing for solar panel bird proofing mesh. INSTALLATION GUIDE: Position the wire mesh around the edge of the solar panel array and make sure the clip rod passes through the mesh at a slight upward angle. Slide the speed washer onto the threaded rod and push it firmly against the mesh. Adjust the mesh until it sits neatly and securely around the panel frame. Hand-tighten the locking nut, then use the threaded nut to apply the required tension and hold the mesh firmly in position. Trim away any excess mesh extending above the top edge of the solar panel array. Once the installation is secure, cut the remaining clip rod flush with the outer face of the speed washer for a neat finish.