SOMATHERM for You 303520102 Bath/Shower Tap Fitting System Diameter 16 PER Tube Crimp Fittings F15/21

Complete kit for connecting accessories to your plasterboard quickly and easily. This kit shower and bath bathroom shower contains everything you need to connect from your tap in less than 5 minutes. 1 single hole to hole saws the module, no additional holes to install, which can be the most robust on the market. The connection remains open, even after installation, which ensures at any time without breaking, intervening the divider or Quick and easy to install, the kit includes everything needed to be connected to the tap. Suitable for plasterboard from 9.5 to 25 mm. This kit is designed to be connected by press fittings included in a 16 mm diameter pipe for sanitary and shower or bath with shower (mixer, mixer) Before installation, it is important to clean the pipes. Check the water pressure: 4 bar max, but also plan the installation of a pressure reducing valve in the main flow head. This device is designed to work with fresh water; for hard water, provides water treatment. The installation of such a connection must be carried out without mechanical action (from support required expansion or missing). Adjust the tightening torque to avoid damage to the taps 30 N.mètre max. To the joint seal, the preferred PTFE or anaerobic paste. Raffia use with common pasta is prohibited. Fully tightening the fixing nut connection using pliers or a wrench (tighten moderately). The installation and use of this connection must comply with the rules of art, DTU and regulations.