SOMATHERM for YOU P569 30 Gasket J dim. 30x72 Seal Jacob Delafon Flush Mechanism x 72 4, Grey

When the flushing doesn't stop filling, it's important to check the mechanism, often the cause of the problem. If the flush mechanism looks in good condition, this is surely the seal you need to change. The advantage is that replacing a seal is a simple operation and takes only a few minutes. How to replace the seal in minutes, you will only need simple tools such as an adjustable wrench or a multi-socket plier. To disassemble the tank: cut off the water and empty the tank by pulling the flush - remove the control knob and remove the lid - unscrew the tank fasteners to the bowl and remove the tank by lifting it up Remove the mechanism using the pliers, clean the reach of the seal and remove the limescale (by scraping or soaking it in white vinegar). Install a new seal at the base of the emptying mechanism. Place it back into the tank and check that it does not interfere with the filling mechanism. Attach the mechanism with the ring from the bottom of the tank. Dimensions: outer diameter. 72 mm x inner diameter. 30 mm x 4 mm thick - Sanitary Water / Toilette / Toilet Wind up and connect the tank. Your toilet mechanism is as good as new, Manufacturer: Somatherm