sourcingmap 10 Pcs Red Double Row 20 Pin 10P Positions DIP Switch 2.54mm Pitch

Specification: Product Name: DIP Switch Adapter; Type: DIP; Features: 10 Positions( 2 Row 20 Pin); Pitch: 2.54mm/0.1''; Non-Switching Rating: 100mA DC 50V; Switching Rating: 25mA DC 24V; Contact resistance: 50mΩ 24VDC/100mA (at initial), 100mΩ typical, 24VDC/100mA (after life test); Total Size: 2.7 x 1 x 1.1cm / 1 x 0.4 x 0.43 inch (LxWxH); Material: Plastic, Cooper; Color: Red; Net Weight: 19g; Package Content: 10 pcs x DIP Switch Multiple Uses: This PCB DIP Switch is a quality accessory for PCB Chip Adapter, Integrated Circuit, DIY circuit, Automatic Control, Radio, electronics Lab, and Factory test use Advantage: This Double Row DIP Switch is made of quality material, which does not easily overheat, is not prone to open or short circuits, and has a long service life. The 2.54mm Pitch fits standard IC sockets and breadboards. Ten Positions set multiple parameters on one board, and the Red housing makes ON/OFF state clear Easy to use: The 10 Position DIP Switch installs into a printed PCB board. With the circuit off, each actuator slides to ON or OFF to set the configuration, then the board is re-powered to confirm Notes: The 2.54mm Pitch must match the socket before soldering, and the circuit must be off. The rated load (24 VDC, 25 mA) should not be exceeded. The actuator must stay clean, and the pins should not be touched directly to preserve solderability, Weight: 6.25E-4 pounds, Manufacturer: Sourcingmap