sourcingmap Pneumatic Air Tubing, 4mm OD x 2.5mm ID 118 Inch Long PU Polyurethane Compressor Tubing Hose Pipe

Specification: Product Name: Polyurethane Air Tube; Material: PU; Outside Diameter: 4mm / 0.157"; Inside Diameter: 2.5mm / 0.098"; Wall Thickness: 0.75mm / 0.029"; Total Length: 3Meter / 9.8Ft; Package Content: 1 x PU Air Tube Multiple Uses: The PU pneumatic tubing pipe is made of quality material and can bend around tight corners without kinking, and can be installed in narrow place. Polyurethane pipe tubing resists wear, abrasion, oil, and most non-corrosive fluids, so the wear-resistant air hose pipe has a long life and can keep a steady flow. The lightweight PU pipe is easy to cut, route, and seat into push-to-connect fittings than rigid nylon tubing, making it easier to install Advantage: The Pneumatic Air Hose Pipe is a clear PU tubing line engineered for compressed air, water, and non-corrosive fluid transfer in low-pressure pneumatic systems. This wear-resistant pneumatic tubing pipe is used in factory workstations, automotive assembly lines, air fluid systems. It is also suitable for gas system repair, DIY custom robot, 3D printer pneumatics, and small automation projects Easy to use: Cut the clear PU air hose pipe to the required length with a sharp tubing cutter or fine-tooth saw, and push the end firmly into the connector, then connect the opposite end to the compressor, manifold, regulator, or fluid source Notes: The pneumatic air hose pipe is rated for a working pressure of 1 MPa (145 PSI) and a working temperature of -4°F to 176°F (-20°C to 80°C), so do not push past these limits during use. The PU tubing is intended for compressed air, water, and non-corrosive fluids only. Keep the clear tubing away from corrosive liquid, open flame, edges, hot surfaces, and prolonged direct sunlight