Speedfit FLX29 15mm x M12 Flexible Mixer Tap Hose (Pair)

Plumbing Superstore

These push-fit flexi hoses are designed for connecting plastic and copper pipes to female mixer taps, perfect for monobloc mix taps. Manufactured in the UK by John Guest Speedfit, they ensure easy installation by simply pushing the fitting onto the pipe and screwing the thread into the bloc. Offset spanner locations aid setup, and the design facilitates easy demounting by pushing the collet and pulling the pipe. Ideal for cramped spaces, they eliminate the need for hot works, cutting installation time by 40% compared to traditional methods. Sold in pairs, they offer push-fit and demountable connections, are WRAS approved, suitable for 6 Bar at 65C, and come in various sizes. Developed with strict quality control in modern facilities in West London and Maidenhead, these hoses consistently meet high standards, garnering awards from top testing organizations. Note, they are unsuitable for central heating systems and require the relevant manufacturer's insert for all plastic pipes.. John Guest Speedfit Flexi Hose Monobloc Mixers Pair - 15mm x M12 x 300mm Stainless Steel

ManoMano

JG Speedfit monobloc mixer flexi hose (braided) for the connection of plastic and copper pipe to a female mixer tap (monobloc mixers). To make a connection simply push the push-fit fitting fully on to the pipe and screw the thread into the bloc. The hose has offset spanner locations for ease installation. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit monobloc mixer flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. An alternative to hard piping to a tap or fixture Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene

City Plumbing

John Guest Speedfit monobloc mixer flexi hose (braided) for the connection of plastic and copper pipe to a female mixer tap (monobloc mixers). To make a connection simply push the push-fit fitting fully on to the pipe and screw the thread into the bloc. The hose has offset spanner locations for ease installation. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The John Guest Speedfit monobloc mixer flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.

Amazon

Suitable for domestic hot and cold water Very flexible Easy connection between pipe and monobloc Off set spanner location for easy installation, Weight: 0.076279942652 Pounds, Manufacturer: John Guest