Spurtar Oil Filter Wrench Adjustable 3-Jaw Removal Tool 64-116mm

Compatibility & Fitment: Designed for removing most standard spin-on oil filters from 64 mm to 116 mm (2.52" to 4.57") in diameter. Not suitable for vehicles or motorcycles with narrow engine compartments and limited access to the oil filter. Not compatible with cartridge-style filters, filters under 64 mm in diameter, or oil filters with dome-shaped ends. 3-Jaw Gear-Driven Design: The three-jaw mechanism works with a gear drive to tighten around the oil filter when turned counterclockwise for removal. Continuous inward pressure is required to keep the jaws engaged, as the mechanism is not self-tightening and may loosen if pressure is released. Multi-Drive Compatibility: Equipped with a 3/8" to 1/2" adapter, this oil filter tool works with 3/8" and 1/2" square drive ratchets as well as 21mm hex socket, offering flexible tool options for DIY oil changes and professional automotive maintenance. Important Usage Note: Apply steady, even force while turning counterclockwise and maintain inward pressure to help prevent the jaws from slipping. For stubborn filters, stabilize the tool with one hand while turning with the other. Install new oil filters by hand only, tightening 3/4 to 1 full turn after the gasket makes contact, or follow the filter manufacturer's instructions. Oil Filter Change Tips: Clean and dry the filter before use for better jaw contact. Position the wrench near the filter base for better stability and control. If the jaws slip, place a thin cloth between the filter and jaws to help improve grip. Maintain steady inward pressure during removal, especially with oily or stubborn filters. Ensure sufficient clearance to operate the tool safely