SSIMDER TIG Welder 200 220V MMA 2 in 1 Welding Machine Stick Arc DC IGBT Inverter

TIG WELDING PRECISION FOR STEEL PROJECTS: Clean, precise welds on stainless steel, carbon steel and alloy steel with DC TIG technology. Unlike messy stick welding that burns through thin metal and leaves spatter everywhere, it delivers smooth heat control from 10A to 140A for attractive weld beads. The IGBT inverter holds a stable arc at low amperage for thin sheet metal, exhaust pipes, kitchen equipment and delicate work where appearance matters. DC only - it does not weld aluminium TWO PROCESSES IN ONE MACHINE - TIG AND STICK: Two processes, one box. TIG handles stainless exhaust repairs, kitchen equipment, bicycle frames and metal art with spatter-free results. Stick MMA takes over on farm gates, shed brackets, trailer repairs and heavier carbon steel, with Hot Start for easy striking and Arc Force to stop the electrode sticking. A beginner friendly first TIG welder for DIY and hobby work, and no gas is needed at all in Stick mode LIFT TIG START - SAFE FOR HOME WORKSHOPS: Lift TIG starts by touching the tungsten to the work and lifting, so there is no high-frequency interference with your WiFi router, computer or household electronics. The WP-17 torch is air-cooled and takes 1.6mm and 2.4mm tungsten. Duty cycle is 35% at 140A - three and a half minutes of welding in every ten at full output - 60% at 92A and 100% at 71A for continuous work. Post-flow runs 1 to 10 seconds to protect the cooling weld BUILT FOR REAL GARAGE JOBS: A stainless splashback, a car exhaust, a garden gate hinge, a custom shelf bracket. It welds 0.5mm to 3mm steel in a single pass, and thicker plate with a bevelled joint and several passes. . 3.8kg and 32 x 26 x 13cm, it lifts with one hand WHAT COMES IN THE BOX, AND WHAT YOU STILL NEED: WP-17 TIG torch, ground clamp, MMA electrode holder, gas hose and user manual. You will also need a pure argon cylinder with a regulator, tungsten electrodes and filler rod - the hose fits a standard regulator outlet. Argon only, because CO2 destroys the tungsten, and MMA mode needs no gas at all. SSimder has built welding equipment since 2004, and every limit is stated up front