Starrett Tungsten Carbide Tipped Hole Saw CT200 Deep Cut Holesaw Cutter For Wood Suspended Flooring Reinforced Concrete & Fibreglass 51MM

Amazon

PERFORMANCE: The strong, high-performance triple-chip Tungsten Carbide Tipped (CT) Hole Saw offers a longer blade life when cutting difficult and abrasive Materials. SURFACE FINISH: This saw is particularly suitable where there is a requirement for a high-quality surface finish on the entry and exit hole and provides a smooth cut when cutting traditional lath and plaster. TOP QUALITY: CT hole saws are made from steel with tough tungsten carbide tipped teeth that have a positive cutting angle which provides fast and efficient removal of chips and swarf. CUTTING DEPTH: The CT hole saw has a cutting depth of 41mm (1.5/8″), Suitable for use in mains and battery-operated tools in a fraction of the time taken by a standard hole saw. MULTI-PURPOSE: A cost-effective solution for cutting nail-embedded wood, wood and metal combination, suspended flooring, reinforced concrete and fibreglass. WIDE APPLICATIONS: These drill hole saws are ideal for a wide range of interior works, woodwork, metalworking, plumbing, electrical work, professional workplaces, DIY projects Please Note: This carbide-tipped hole saw does not include the Arbor and Pilot drill.

ManoMano

Starrett: 51mm Carbide Tipped Holes AW High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10. MPN: CT200 EAN: 0049659656244 51mm Carbide Tipped Holes AW Attributes: Blade Material: Carbide-tipped Cutting Depth: 41mm Diameter: 51mm Item: Holesaws MFR Part No.: CT200 Number of Pieces: 1

Zoro Tools

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth.Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.