Stormsure Heel and Sole Repair Kit Strong, Durable Flexible to Soles Upper Fabrics: Extend the Life of Your Footwear

Extend the lifespan of your favourite boots and shoes and save money on replacements with Stormsure. Easily make durable, effective and waterproof repairs on heels and soles including; rubber, vulcanised rubber, Croslite, cork, rope, Gore-Tex, Vibram, neoprene and more. Stormsure Flexible Repair Adhesive will create a strong bond resulting in a long-lasting repair. Cover, renovate and seal perished areas. Use Stormsure Flexible Repair Adhesive to reattach a sole or heel if it has separated. Also use Stormsure Adhesive to glue on a brand new sole or heel if required. If the heel or sole is worn or damaged, Stormsure Adhesive can be used to re-build the sole and the heel. The glue turns into a very hard rubbery like material when fully cured and is perfect to fill holes, gaps and even make a brand new heel and sole. It is flexible and durable enough to withstand the riggers of walking and hiking. Excellent for synthetic materials, Stormsure adhesive can be used to fill in and cover holes or tears and seal perished areas. It works on all types of footwear materials. Can also be used to glue back on eyelets, hooks or decorations that may have come off or damaged. Stormsure Adhesive is 100% waterproof so all repairs will keep the inside of the boot dry from the elements. The adhesive can be painted onto the surface of the sole to act as a layer of waterproofing and protective barrier in extreme conditions. Stormsure Flexible Repair Adhesive can repair everything from worn material to a large hole. Repairs are waterproof, flexible and resistant to abrasion (weather and water abrasion). TUFF Tape is a transparent non-rip tape that is both waterproof and durable. Repairs can be done quickly by sticking a TUFF Tape patch directly onto a small hole. Larger holes and seams can be fixed neatly and with ease when using TUFF Tape and Stormsure Flexible Repair Adhesive together. Kit contains: 1 x Stormsure Flexible Repair Adhesive 5g tube. 1 x Sand Paper. 1 x Protective Gloves. 2 x TUFF Tape Repair Patches. Directions: Clean your boots or shoes thoroughly. Use a soft brush to remove dirt and debris. Where possible and if appropriate, use the sand paper provided to roughen up the surface a bit which helps the adhesive adhere better. Clean again after sanding. Apply adhesive to the damaged area and leave to dry (cure) for the full 24 hours.