Strike Pack for PS4, Back Button Attachment Playstation 4, F.P.S. Dominator Controller Mod Kit, Paddles, with 2pcs Wireless Controllers Joystick Silicone Thumb Grips Analog Caps

❶ Programming Function Setting - Long press the SET button for 2 seconds, the corresponding LED light of × flashes quickly (4HZ), then short press the M1 or M2 button, the LED light will flash slowly on the screen of the corresponding function (the flashing sequence is ×, ○, △, □, R3, L3, R2, L2, R1, L1). ❷ Programming Function Setting - Then press the SET button, the corresponding function will be mapped to M1/2; for example: when entering the programming mode, press the M1 button to display the LED on R1, and then press the SET button again, the LED on R1 becomes Long light, M1 function is R1; when programming M2, it is similar to the above. Cancel Function - Long press the SET button for 5 seconds, the programming indicator LED will change from fast flashing to off, and the M1/2 function is cleared. Programming Button Memory Function - Insert the back extension button into the handle, if M1/2 has no function, LED1 flashes slowly (2HZ) for 3 seconds and then goes out, long press the SET button to enter the programming mode and then LED1 flashes quickly. If M1/2 has memorized the last programming function, the corresponding LED will be long light. Turbo Function Setting - Press and hold the function button and the Turbo button at the same time, the function button has the Turbo burst function; press the above combination key again to cancel the button Turbo function. If the Turbo function is set, after pressing the button, the LED corresponding to the function flashes quickly (4HZ).