Tap Valves Replacement Ceramic Disc Cartridge Gi Brass Insert Gland Quarter Turn

Measurements--Height (brass to brass): 53mm; Diameter at Thread: 23.8mm; Splines: 20; Nut Height: 10mm; Drilled and threaded to accept a 4 mm screw. All size information can be seen visually in the picture of the ceramic tap valve. If you are not sure whether they will fit your tap, you can turn the water off, take the cartridge out, and check the dimensions against the product schematic on the Amazon page. Notice--There are so many sizes of these tap valve cartridges. Please double-check the dimensions before making a purchase. You can remove the old cartridge and measure it, then compare it to our ceramic disc cartridges. When you change it, they may look the same, but it's the dimensions that matter. No more drips--Did the job of stopping kitchen tap from dripping and saved a bomb in not having to replace the tap. Comes with fixed washers--Makes ceramic tap cartridge very easy to use and seal the tap good. Excellent value--We provide a pair of quarter-turn tap valves. According to people's habits, Clockwise open: turn clockwise to turn on the tap and anti-clockwise to turn it off. The hot water tap is usually located on the left side. Turning anti-clockwise turns the tap on, and clockwise turns the tap off. The cold water tap is usually located on the right side., Manufacturer: Seawhisper