Tapel Concrete Floor Coating - Slate Grey (Slate Grey, 1 Liter)

⚠️ 【IMPORTANT — READ BEFORE APPLYING】 Designed for bare concrete, cement, and masonry surfaces. This is a HIGHLY CONCENTRATED FORMULA, and viscosity may vary depending on storage temperature and shipping conditions. If the coating feels too thick for your application, simply add clean water gradually while stirring until a smooth, rollable consistency is achieved. Stir thoroughly for 2–3 minutes before use. Apply with a short-nap roller (3/8" or less). 🚫【WON'T PEEL. WON'T BUBBLE. WON'T YELLOW.BUILT TO BOND.】Advanced coating technology penetrates concrete pores instead of sitting on the surface. Even after thinning with water for easier application, the coating maintains excellent adhesion and long-term durability. ⚡ 【OPEN. STIR. ADJUST IF NEEDED. APPLY.】Ready to use straight from the bucket. If a smoother consistency is preferred, gradually add clean water while stirring until the desired application viscosity is reached. Apply 1–2 coats depending on traffic level. 🛡️【SURVIVES VEHICLE TIRES, CHEMICALS & HEAVY USE】Cures to 6H hardness. Resists oil, gasoline, antifreeze, and industrial cleaners. Safe for use over radiant-heated floors. Designed for garages, workshops, and basements that take daily abuse. 🌿【LOW VOC — SAFE FOR PEOPLE & PETS AFTER CURE】Low VOC formula with minimal odor during application. Safe for enclosed garages and basements. Light foot traffic in 24 hours. Safe for pets after full cure (7 days). No industrial ventilation required. 🎨【MATTE FINISH — LIGHT FOOT TRAFFIC IN 24 HOURS】Apply with a roller or brush. Minimum surface prep: clean, dry, free of oil. No etching required on most concrete surfaces. Low-sheen matte finish hides scuffs and tire marks. Full cure: 7 days.