Thermalright Burst Assassin 120 SE CPU Cooler, 6 Heat Pipes Heatsink 12cm PWM Fan Air AGHP Technology, for Intel LGA1851/1700/115X/1200&AM4/AM5, 148mm High Computer Cooling

[Product specification] Burst Assassin 120 SE; CPU Cooler dimensions: 124(L)x77(W)x148(H)mm (4.88x3.03x5.83inch); Heat sink material: aluminum,the 6 heatpipes oxidation-resistant pure copper heatpipes, and HDT heatpipes with direct touch fine underside finish technology, and specification symmetrical aluminium fins all allow for a further improvement in cooling performance. [PWM Fans] TL-C12C; Standard size PWM fan:120x120x25mm (4.72x4.72x0.98 inches); fan speed (RPM):1550rpm±10%; power port: 4pin pwm; Voltage:12V; Air flow:66.17CFM(MAX); Noise Level≤25.6dB(A), the cpu fan pairs efficient cool with low-noise-level, providing you an environment with both efficient cool and true quietness. [No memory height limit] The heatsink is equipped with fin offset technology, so that the overall heatsink will not be limited by the memory height when it is installed, and there is no need to worry about the high vest of the motherboard. [148mm Height] From the pure copper base of the heatsink to the top of the heat pipe, the overall height is 148mm, which is highly compatible, compatible with small and medium-sized chassis, as a small heat sink with 6 heat pipes in a single tower, the heat dissipation performance is very good. [Detailed Optimisation] The cpu cooler's pwm fan is surrounded by soft silicone pads for noise reduction, and the radiator is configured with SS2 grommets that are compatible with a wide range of CPU models, easy to install and remove, and can be easily maintained and upgraded. [Compatibility] The CPU cooler Socket supports: Intel: LGA1150/1151/1155/1156/1200/1700/1851 AMD:AM4/AM5; for different CPU socket platforms, corresponding mounting plate or fastener parts are provided.(Note: AMD's motherboard installation requires the use of the original motherboard backplane for installation.)