Thermalright TL-M12Q-S X3 Wireless Splicing Case Fan-120mm Quiet,Infinity Mirror ARGB Lighting Effects,New Power Chip Module Simplifies Wiring Management,3-Packs Building Blocks Fan

[Silent Fan Parameters] CPU Fan size: 124x120x25mm, speed: 2000RPM ± 10%, noise≤28.2DB (A), air volume: 68.9CFM, air pressure: 2.21mm H2O, power supply interface: 4PIN PWM, lighting interface: 5V 3PIN, voltage: DC 12V, current: 0.17A. Higher air flow can improve cooling performance and maintain low noise of the fan [High performance heat dissipation] The noise reducing 7-blade design can achieve a speed of up to 2000RPM and a noise level of ≤28.2 decibels. The four corners of the fan are equipped with soft silicone corner pads, allowing the fan to achieve a combination of high heat dissipation and low noise performance. [ARGB Infinite Mirror] The two sides of the pc fan have an infinite frame structure and a segmented light effect design. There is a slender segmented LED light strip on both sides of the fan frame, giving the fan a rich ARGB lighting effect. [ Wireless Splicing ] The new power module cable simplifies wiring and reduces the complexity of internal cables in the chassis, providing powerful power for argb fans. The signals and power are transmitted between fans through contacts (note: the control cable needs to be connected to the side of the fan with pins, do not connect to the other side) [ Detail Optimization ] The cooler fan adopts industrial grade strength PBT+PC material with UL CLASSA insulation level, supports PWM series control of the fan, the power interface is 4pin PWM, and the lighting interface is 3pin ARGB. Fans of the same type are connected in series through buckles, and then connected to the corresponding interface of the motherboard through connectors that fasten the wires.