Thermostatic Bar Mixer Shower Fast Fix Easy Fit Kit for Exposed

General description A fast fit fixing kit designed for bar valve showers, simplifying the installation of bar shower valves. This kit eliminates the need for in-wall support battens and reduces the risk of in-wall leakage, as all joints are located outside the wall. It is suitable for all UK manufactured bar valves. Technical specifications Inlet pipe size: 15mm copper tube Inlet centres: approximately 150mm Thread fittings: 3/4" Protrusion from finished surface tile: 30mm +/- 2mm Hole diameter through tiles: approximately 20mm Olive protrusion from wall plate: at least 4mm Installation Check that the thermostatic mixer valve (TMV) has inlets at approximately 150mm centres and 3/4" thread fittings. Fit inlet pipes in 15mm copper tube so the outlets are at 150mm centres using the provided template. Ensure the inlet pipes allow for about 2mm adjustment in each direction. Fit the wall plate over the copper tube and mark a suitable place to drill holes. Drill holes, fit wall plugs, and