Tile Backer Board 12mm XPS Cement Board, 10 Pack + 150 Washers & 10m tape for timber or stud walls only; (use with tanking compound) seals wet-room joints

Prices from
175.32

Sponsored links

COMPARE ALL WEBSHOPS (2)

Description

Amazon Strong Enough to Park On - Each square metre of this tile backer board takes the weight of around 30 family cars before it gives: 483 kPa compressive strength (EN 826), 61% above the 300 kPa that EN 13164 requires. A rigid tile underlay that stays solid under heavy floor tiles. Every board is covered by a Declaration of Performance to BS EN 13164. Stays Flat in a Steamy Bathroom - After 2 days at 70 °C and 90% humidity, a 1.2 m backer board moves less than the thickness of a 1p coin: 0.1% size change against a 5% limit (EN 1604). It won't swell or bow, so grout lines stay crack-free in showers, wet rooms, kitchens and over underfloor heating. Cement Board Face That Won't Peel Off - Fibreglass mesh and cement coating on both faces give tile adhesive a firm key. A 10 x 10 cm patch takes about 6 adults pulling to separate it: 465 kPa tensile bond (EN 1607, at least 400 kPa required). Flat to within 1.35 mm per metre (EN 825) for straight, tight tile joints on walls and floors. Waterproof Core, Warm Insulation Board - The XPS foam core keeps heat in the room and tiles warmer underfoot, ideal as an underfloor heating insulation board. The 6 mm board tested at R 0.174 m²K/W (EN 12667); thicker boards insulate more. Soaked for 28 days, the core takes in less than 30 ml of water per litre: WL(T)3 (EN 12087). Seal joints with tanking tape in showers and wet rooms. What's in the Box - 10 boards + 150 x 36 mm galvanised washers + a 10 m roll of 125 mm waterproof joint tape. Screws not included. Covers 7.2 m² (0.72 m² per board); cuts with a utility knife. Washers and screws are for timber floors and stud walls only; on concrete or masonry use flexible tile adhesive. Waterproof internal corners are sold separately.

Compare webshops (2)

Sponsored links · Some shops pay us a fee

Sort by:

£ 175.32

£ 175.32

Description (1)

Strong Enough to Park On - Each square metre of this tile backer board takes the weight of around 30 family cars before it gives: 483 kPa compressive strength (EN 826), 61% above the 300 kPa that EN 13164 requires. A rigid tile underlay that stays solid under heavy floor tiles. Every board is covered by a Declaration of Performance to BS EN 13164. Stays Flat in a Steamy Bathroom - After 2 days at 70 °C and 90% humidity, a 1.2 m backer board moves less than the thickness of a 1p coin: 0.1% size change against a 5% limit (EN 1604). It won't swell or bow, so grout lines stay crack-free in showers, wet rooms, kitchens and over underfloor heating. Cement Board Face That Won't Peel Off - Fibreglass mesh and cement coating on both faces give tile adhesive a firm key. A 10 x 10 cm patch takes about 6 adults pulling to separate it: 465 kPa tensile bond (EN 1607, at least 400 kPa required). Flat to within 1.35 mm per metre (EN 825) for straight, tight tile joints on walls and floors. Waterproof Core, Warm Insulation Board - The XPS foam core keeps heat in the room and tiles warmer underfoot, ideal as an underfloor heating insulation board. The 6 mm board tested at R 0.174 m²K/W (EN 12667); thicker boards insulate more. Soaked for 28 days, the core takes in less than 30 ml of water per litre: WL(T)3 (EN 12087). Seal joints with tanking tape in showers and wet rooms. What's in the Box - 10 boards + 150 x 36 mm galvanised washers + a 10 m roll of 125 mm waterproof joint tape. Screws not included. Covers 7.2 m² (0.72 m² per board); cuts with a utility knife. Washers and screws are for timber floors and stud walls only; on concrete or masonry use flexible tile adhesive. Waterproof internal corners are sold separately.


Product specifications

Brand THISISWHOLESALE
EAN
  • 0693036718089
Color
  • Grey
MPN
  • TB12MMX10WTAPE

Featured Choice
£ 175.32
To Shop