TIMCO Classic Multi Purpose Countersunk A2 Stainless Steel Woodcrews 5.0 x 80

All The Features And Superior Performance Of The Classic Multi-Purpose Screw Manufactured From A2 Stainless Steel. Ideal Where Ultimate Corrosion Resistance Is Required When Fixing To Softwoods Hardwood (Pre-Drilled) Chipboard Mdf And Plastic. Stainless Steel Must Be Used Where There Is Corrosive Environment And/Or The Base Material Has Inherent Corrosive Characteristics E.g. Green Oak.Double Countersunk Reduces The Likelihood Of Head Shear And Assists Completion Of Countersinking40 Deep Single Thread To Provide A Secure Fixing With High Pull-Out ResistanceSurface Hardened Up To 750 Hv To Prevent Torque Shearing Under Load And A Core Hardness Of Up To 450 Hv For Improved DuctilitySingle Slash On 25Mm+ To Reduce Torque And The Likelihood Of The Timber Splitting When The Screw Is Inserted Close To The EdgeAll Sizes Up To And Including 75Mm Are Fully Threaded And Lengths 80Mm And Above All Have 70Mm Thread LengthSee `More Information` below for sizing and Colour detailsSpecificationPackaged Weight = 0.04kgPackaged Length = 165mmHead = Double CountersunkThread Diameter (metric) = 5mmType of Point = 25° Sharp with Single SlashPackaged Height = 15mmLength (metric) = 80mmPackaged Width = 94mmThread Length (metric) = 70mmType of Recess = PoziDriver Bit Size = PZ2Material = Austenitic Stainless Steel (A2-304)PTDTIM50080CHSSP

Double countersunk reduces the likelihood of head shear and assists completion of countersinking 40° deep single thread to provide a secure fixing with high pull-out resistance Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length