Trend B127 Bearing 1/2 in Diameter 1/4 in Bore

This is a bearing designed for use with Trend bearing-guided router cutters. It features shielded construction to prevent dust ingress and is grease-packed for long-lasting performance. The bearing is maintenance-free and should not be cleaned with solvents or lubricated, as this can dissolve the grease and lead to premature failure. The part number is TREB127. Dimensions are 1/2 inch outside diameter, 1/4 inch inside diameter, and 3/16 inch thickness, designed for direct fit to 1/4 inch shank mounting. The bearing is compatible with all Trend bearing-guided router cutters and is built to provide smooth, precise operation while protecting the bearing surface from dust.

Features

• Outside diameter: 1/2 inch (12.7 mm)
• Inside diameter: 1/4 inch (6.35 mm)
• Thickness: 3/16 inch
• For 1/4 inch shank mounting
• Compatible with Trend bearing-guided router cutters
• Grease-packed with shielding on both sides

Installation and usage

Installation: Ensure the router is turned off and unplugged before installation. Remove the old bearing and clean the mounting area. Align the new bearing with the router cutter and press into place securely. Usage: Use with compatible router cutters for precise and smooth routing operations. Maintenance: This bearing is maintenance-free; do not clean with solvents or lubricate, as this can dissolve the grease and cause premature bearing failure. Handle with care to avoid damaging the shielded bearing surface.

Ensure the router is turned off and unplugged before installation. Remove the old bearing and clean the mounting area. Align the new bearing with the router cutter and press into place securely. Handle with care to avoid damaging the shielded bearing surface.