Trend Panel Raiser Router Cutter 12mm Radius 41mm Diameter C150X1/4TC

The TREND C150X1/4 Raised Panel bit is designed to craft beautifully shaped raised panels for cabinet doors and similar wood surfaces. It features a 12mm radius to create dimension and a professional finish. The cutter is Tungsten carbide tipped with 2.0mm micro-granular tips for durability, and it has a PTFE non-stick coating to reduce friction and resin buildup. The tip face is polished to 800-grit to ensure precision and a smooth cut. Longer shanks accommodate both handheld and table routers, and visible safety markings provide shank-positioning guidance for safer operation. This bit is suitable for natural timber and MDF and is intended for use in a router table setup, enabling controlled, multi-pass finishing.

Features

• Radius 12mm for raised panels
• Tungsten carbide tipped, 2.0mm tips
• PTFE non-stick coating reduces friction
• 800-grit polished tip face for a fine finish
• Longer shanks suit handheld and table routers
• Safety K-Mark and EN Shank Markings

Usage and setup

For use in a router table only. Designed to create raised panels on wood panels, including curved panels with a copy pin. Take 3–4 passes, increasing the depth with each pass. Use a stationary variable speed router, either mounted overhead or inverted in a router table, at a reduced speed. Suitable for natural timber and MDF.

For safe operation, use in a router table only; take several passes increasing depth; must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed.