Trend Pierce and Trim Cutter 1/4 Inch Shank 47/4X1/4TC Router Bit

This professional-grade pierce and trim cutter is designed for laminate worktops, enabling precise cutting and punching of apertures with a clean finish. It features a guide base for accurate control and a piercing tip that drills through laminate materials in a single pass, delivering fast and efficient cuts. The cutter is made from Tungsten Carbide (TCT), with a 6.3 mm diameter and 18 mm cutting length, and is designed for use with small routers that accept a 1/4 inch shank. With an overall length of about 65 mm, it supports controlled insertion and consistent performance while producing polished results on laminate and similar thin surfaces. The tool is described as trimming and piercing, suitable for shaping edges, decorative mouldings, and intricate profiles with precision. The tip is further augmented by a 2.0 mm micro-granular structure for durability, and a highly ground tip face finished to 1200-grit to achieve a refined, mirror-like cut. Longer shanks enhance compatibility with handheld and table routers, offering versatility and safety features such as shank positioning marks for secure clamping.

Features

• 6.3 mm diameter, 18 mm cutting length
• Tungsten Carbide tipped for durability
• Piercing tip drills laminate in one pass
• Compatible with 1/4 inch shank routers
• Guide base for accurate control
• 1200-grit polished tip for fine finish

Technical specifications

• Diameter: 6.3 mm (1/4 in)
• Cutting length: 18 mm
• Overall length: ~65 mm
• Shank diameter: 6.3 mm (1/4 in)
• Material: Tungsten Carbide (TCT)
• Type: Trimming and piercing cutter

Ensure the cutter is securely tightened in a compatible router with a 1/4 inch shank, and adjust the cutting depth to 18 mm. Follow safe handling practices and observe shank position markings (K-Mark/EN) for proper alignment and secure operation.