Trend T46/01X1/2TC 90-Degree 12.7x25mm Template Profiler Router Bit Pack 1

General description This product is a self-guiding router cutter with a tungsten carbide tip, designed for trimming, bevelling, and copy profiling of timber, plastic laminate, and plywood edges. It features a 1/2 inch shank and a 90° angle, making it suitable for both straight and curved work. The cutter is ideal for cabinet making, countertop production, and shaping applications, allowing precise edge trimming and profiling by following templates or base edges using its mounted bearing guide. Technical specifications Type: Trimming and profiling cutter Material: Tungsten Carbide Shank diameter: 1/2 inch Cutting diameter: 12.7 mm (1/2 inch) Cutting length: 25 mm Overall length: approximately 82 mm Angle: 90° Finish: TCT (Tungsten Carbide Tipped) Compatibility and accessories Compatible with routers that accept 1/2 inch shank cutters Suitable for cutting plastic laminate, plywood, and timber Can be used with bearing guides for copy profiling and curved work Installation Insert the

Self-guiding cutters with bearings mounted for trimming and bevelling timber lippings and plastic laminate edges for cabinet making countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work bearings are normally fractionally larger than cutter diameter to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/2 in Shank.Angle A = 90° D = 12.7 mmC = 25 mmPTDTRET460112TC