Trend Two Flute Router Cutter 12.7 mm

ManoMano

General description This is a two-flute straight cutter designed for woodworking tasks such as grooving, rebating, morticing, drilling, and shallow lateral routing, including recessing hinges. It provides a cleaner finish compared to single-flute cutters and is especially designed for hollow honeycomb board worktops. The cutter is ideal for working on materials like chipboard, MDF, plywood, hardwoods, and hard plastics. Technical specifications Cutting Diameter: 12.7 mm (1/2 inch) Length of Cut: 50 mm Overall Length: 108 mm Shank Diameter: 1/2 inch Material: Tungsten Carbide (TCT) Type: Straight Plunging Bits MPN: 3/83X1/2TC EAN: 5027654005248 Compatibility and accessories Compatible with professional routers with an 80 mm deep plunge Designed for use with a one-piece multi-slit collet for safe cutter retraction Installation Ensure the router is turned off and unplugged before installation Use a compatible collet to securely hold the cutter in the router Insert the cutter into the

Amazon

VERSATILE 2-FLUTE STRAIGHT CUTTERS: Ideal for various routing tasks including precise edge trimming, grooving, and rebating. Offers superior surface finishes but requires slower feed speed due to reduced waste clearance. TUNGSTEN CARBIDE TIPPED: 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards. PRECISION CUTTING: Highly ground tip face polished to 1200-grit for precise and accurate cuts, delivering an extra-fine "mirror" finish. VERSATILE SHANK LENGTH: Longer shanks cater to a variety of applications, compatible with handheld and table routers, providing flexibility and convenience. SAFETY ASSURANCE: Features a Safety K-Mark for optimal shank positioning, ensuring strong collet grip. EN Shank Markings for visible cutter safety data.

Power Tools Direct

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 3/83 x 1/2 TCT Two Flute Workshop Cutter has the following specification: D: 12.7mm (1/2in)C: 50mmOL: 108mmShank Diameter: 1/2in For use with professional routers that have a 80mm deep plunge. One piece multi-slit collet to ensure safe cutter retraction into base. Designed for hollow honeycomb board worktops.PTDTRE38312TC