TRENDnet TI-PG62 6-Port Hardened Industrial Gigabit PoE+ DIN-Rail Switch, 4 x Ports, 1 Shared Port (RJ-45/SFP), Dedicated SFP, 120 W Power Budget

Trendnet Ti-pg62 Switch. EU Plug.TRENDnet´s TI-PG62 is a reliable IP30 unmanaged DIN-rail PoE+ switch with a rugged housing rated for extreme industrial environments.It offers 4 Gigabit PoE+ ports, one shared Gigabit port (RJ-45 / SFP), one dedicated SFP slot, and a 12 Gbps switching capacity.Redundant power inputs and a power failure alarm relay.Features:PoE.Power:- A 120 Watt PoE+ power budget supplies up to four Power over Ethernet devices with PoE+ power.Fault Tolerance:- Features redundant power inputs (Primary and RPS) from external power sources and an output alarm relay to indicate the event of input power failure.Industrial Hardened Design:- Equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate with a wide temperature range (- 40.- 75 °C (- 40.- 167 °F)) for harsh environments.Network Ports:- 4 x Gigabit PoE+ ports, 1 x shared Gigabit port (RJ-45 / SFP) and 1 x dedicated SFP slot Redundant.Power:- Redundant power inputs with overload current protection (power supply sold separately models:48VDC3000 / TI-S24048 / TI-S12048) Extreme Temperatures:- Hardened switch is rated for an operating temperature range of -40 to 75 ºC (-40 to 167 ºF) Shock and Vibration Resistant:- Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6) DIN-Rail / Wall Mounts:- IP30 rated metal enclosure with included DIN-rail and wall mount hardware Alarm Relay:- Alarm relay triggered by power failure of primary and / or redundant power Electro Magnetic Compliance:- Complies with FCC Part 15 Subpart B Class A and CE EN 55022 Class A standards Grounding Point:- Grounding point protects equipment from external electrical surges Switching Capacity:- 12 Gbps switching capacity Jumbo Frame:- Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performance.Specifications:Standards:- IEEE 802.3.- IEEE 802.3u.- IEEE 802.3ab.- IEEE 802.3z.- IEEE 802.3x.- IEEE 802.3af.- IEEE 802.3at Device Interface:- 4 x Gigabit PoE+ ports.- 1 x Shared Gigabit port.- 1 x Shared SFP slot.- 1 x Dedicated SFP slot.- 6-pin removable terminal block.- LED indicators.- DIP switch.- DIN-Rail mount.- Wall mount.- Grounding point Data Transfer Rate:- Ethernet:10 Mbps (half duplex), 20 Mbps (full duplex).- Fast Ethernet:100 Mbps (half duplex), 200 Mbps (full duplex).- Gigabit:2000 Mbps (full duplex).Performance:- Data RAM Buffer:1024 KB.- Switching Fabric:12 Gbps.- MAC Address Table:1 K entries.- Jumbo Frame:9 KB.- Forwarding rate:8.9 Mpps (64-byte packet size) Special.Features:- Hardened components rated for extreme temperatures.- Redundant power inputs.- Auto-Negotiation.- Auto store and forward architecture.- Automatic address learning and address aging DC.Power:- Input:48.- 56 V DC.- Compatible power supply:TI-S12048 (sold separately).- Consumption:Max.5.76 Watts (no PoE) AC.Power:- Input:100.- 240 V AC, 50/60 Hz, 2 A.- Compatible power adapter:48VDC3000.- Output:48V DC, 3.34 A 160 W max.- PoE:PoE budget:120 Watts Terminal Block:- Redundant power inputs, alarm relay contact, 6 pin.- Wire range:0.34 mm^2 to 2.5 mm^2.- Solid wire (AWG):12-24/14-22.- Stranded wire (AWG):12-24/14-22.- Torque:5 lb.- In / 0.5 Nm / 0.56 Nm.- Wire strip length:7-8 mm DIP Switch:- OFF (port 5 SFP on, default), ON (port 5 SFP off).- OFF (SFP 1000M, default), ON (SFP 100M) Alarm Relay Contact:- Relay outputs with current carrying capacity of 1A, 24V DC.- Open circuit mode when two power sources are connected.- Short circuit mode when only one power source is connected.- MTBF:460,304 hours Housing:- IP30 metal case.- DIN-rail mount.- Wall mount.- Grounding point.- ESD Protection:Contact:6kV / Air:8kV.- Surge Protection:2kV.- Operating Temperature:- 40 to 75 °C (-40 to 167 °F).- Operating Humidity:Max.95 % non-condensing.- Dimensions:143 x 105 x 36 mm (5.6 x 4.1 x 1.4 in.).- Weight:500 g (1.1 lb). tradeinn Techinn

Ethernet Port Interface: 4 x Gigabit PoE+ ports, 1 x shared Gigabit port (RJ-45/SFP), 1 x dedicated SFP slot PoE+ Power and Switching Capacity: A 12 Gbps switching capacity and 120 W PoE+ power budget supplies up to four power over Ethernet devices with PoE+ power DIN-rail and Wall Mount Kit: This 6-port Gigabit PoE+ industrial switch comes with an integrated DIN-rail mount and mounting hardware Extreme Temperature Switch: The metal hardened IP30 rated Gigabit PoE+ DIN-rail switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/Surge and operate with a wide temperature range (- 40–75 °C (- 40–167 °F)) for harsh environments Redundant Power: The 6-port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: 48VDC3000/TI-S24048/TI-S12048)