Universal Hardware 45mm Finger Pulls Handle Recessed Edge Flush Fitting Pocket Insert Wardrobe Sliding Doors (Bronze)

BRONZE FLUSH FINGER PULL Finish: Bronze — warm dark bronze tone with rich aged look. Shape: round profile, 45mm outer dimension. Construction: solid metal insert with recessed finger pocket for grip. Operation: insert finger into the recessed pocket and slide the door open. 45mm ROUND RECESSED INSERT Outer dimension: 45mm round. Profile: flush-fitting — the rim sits level with the door surface so the door can slide past adjacent doors or into a pocket without obstruction. Recess depth: shallow finger-grip pocket sized for one or two finger insertion. Critical: requires a clean drill or router cut to the matching 45mm round dimension before installation. PACK OF 1 – ONE FLUSH FINGER PULL Pack contents: 1 45mm round bronze flush finger pull. Note: most sliding wardrobes require TWO pulls (one per leading door edge). Order 2 packs for a standard 2-door wardrobe, or 4+ for multi-door fitted wardrobes. Available in matching finishes: Polished Chrome, Satin Chrome, Polished Brass, Bronze. FLUSH-FITTING INSTALLATION Installation: requires a precise 45mm round cut-out in the door — typically made with a drill, hole saw (for round), or router (for square). The insert sits flush in the cut-out with the rim level against the door face. Most pulls use a friction fit or small fixing tabs — no visible screws on the door front. Not for: hinged doors that swing open — flush pulls work where pulling outward isn't possible. IDEAL FOR SLIDING & POCKET DOORS Use cases: sliding wardrobe doors, pocket doors, sliding kitchen larder doors, fitted bedroom wardrobes, sliding cupboards, sliding bathroom doors, fitted built-in furniture, sliding partition doors, contemporary minimalist interiors. Style match: modern, contemporary, minimalist, Scandinavian, Japanese-style interiors where clean surfaces matter. Browse our store: matching 30mm, 40mm, 45mm round and 29mm square flush pulls in chrome, brass, and bronze finishes.