Updated standard water chamber for AirSense 10 and AirCurve HumidAir humidifiers

This standard water chamber is designed for use with the HumidAir humidifier in all AirSense 10 CPAP, AirStart 10 CPAP and AirCurve 10 BiLevel devices. It can be opened for cleaning and filling. CLEANING AND MAINTENANCE: This room is NOT dishwasher safe. It should be cleaned weekly by hand with warm water and mild detergent. After cleaning, let it dry completely, away from direct sunlight and/or heat, before re-inserting it into your sleep therapy device. Replace them as needed, on average every 3-6 months. USE: A replacement water chamber or side cover must always be installed in the AirSense, AirStart or AirCurve device for proper operation. AirSense, AirStart and AirCurve devices CAN be used with an empty water chamber when the device is set to airplane mode. NOTE: The AirSense 10 chamber was originally produced with a metal base plate covering the entire bottom of the chamber. Newer versions have a smaller round metal base plate., Manufacturer: Edionmier