VEATON Automatic Submersible Water Pump, 750W 13000L/H Portable Removal Pump with Base, Check Valve Adapter for Swimming Pool, Hot Tub, Boat Covers, Beds, Rooftop, Shallow Pit

Low Suction & General Drainage: For low-water pickup and general automatic drainage; minimum residual water is 5mm with strainer or 1mm without; use without strainer only in clean water; residual depth is not the automatic start level Flow Performance: 750W motor with maximum flow of 13,000 L/H at 0m head. Maximum head is 9m; these are separate limits. Actual delivery depends on lift and hose setup. Water-Level Sensor: With strainer fitted, starts at approximately 2.5cm when water contacts the probes; runs for about 20 more seconds after low water is detected before stopping; keep probes clear of debris Automatic Sump Drainage: For collected water in suitable sump pits or shallow drainage wells; starts as water rises; fit the strainer on suitable soft surfaces or where debris is present; keep the pump upright and inlet clear Hose Connections: Hose adapters and a rope are included, with an 8m power cable for positioning. Hose not included. Choose the appropriate adapter and check outlet and hose compatibility before installation. Installation & Checks: Residual depth is not the automatic start level; keep inlet, sensors and discharge clear; check periodically and after power loss or blockage; automatic control does not guarantee against flooding; disconnect power before handling