Victron Energy BlueSolar MPPT TR Solar Charge Controller for Panels 150V 70 amp 12/24/36/48 Volt

Victron Energy Blue Solar Mppt 150/70-tr Regulator. Maximize your solar harvest with the Victron BlueSolar MPPT 150/70-Tr regulator. Its ultra-fast MPPT technology boosts energy collection by up to 30% over PWM controllers, excelling even in cloudy conditions. Advanced algorithms find the optimal power point during partial shading, ensuring no watt is wasted. Handling up to 70A and 150V, this fanless controller boasts >98% efficiency and automatically adapts to 12, 24, 36, or 48V battery systems. It features extensive electronic protection, a fully discharged battery recovery function, and flexible charging algorithms. With the Victron BlueSolar MPPT 150/70 Tr controller you can enjoy a charging current up to 70 Amps and PV voltage up to 150 volts.The Victron BlueSolar 150/70-Tr MPPT charge controller can charge a lower rated voltage battery from a higher rated voltage PV panels of at least +5V.The BlueSolar controller will automatically adjust the nominal voltage of the battery to 12, 24, 36, or 48V once connected to the controller.Features:Ultra-fast Maximum Power Point Tracking (MPPT).Especially under cloudy skies, when light intensity changes continuously, an ultra-fast MPPT controller will improve energy harvesting by up to 30% compared to PWM charge controllers, and up to 10% compared to slower MPPT controllers.Advanced Maximum Power Point Detection in case of partial cloud cover.In case of partial cloudiness, two or more maximum power points (MPP) may occur on the load voltage curve.Conventional MPPTs typically select a local MPP, which is not necessarily the optimal MPP.SmartSolar´s innovative algorithm will always maximize energy harvesting by selecting the optimal MPP.Exceptional conversion efficiency.Fanless.Maximum efficiency exceeds 98%.Flexible charging algorithm.A fully programmable charging algorithm (see the software page of our website) and eight pre-programmed charging algorithms, which can be selected with a rotary selector (see manual for more information).Extensive electronic protection.Over-temperature protection and power reduction in case of high temperature.Short-circuit and reverse polarity protection on PV panels.PV reverse current protection.Internal temperature sensor.Compensates absorption and float charge voltage as a function of temperature.Optional sensor for external battery voltage and temperature via Bluetooth.A Smart Battery Sense sensor or a BMV-712 Smart battery monitor can be used to communicate battery voltage and temperature.communicate battery voltage and temperature to one or more SmartSolar charge controllers SmartSolar.Fully discharged battery recovery function.Will start charging even if the battery is discharged to zero volts.Will reconnect to a fully discharged lithium-ion battery with internal disconnect function.VE.Direct.For a wired data connection to a Color Control GX, other GX products, PC or other devices.Remote On/Off.For connection to a VE.BUS BMS, for example.Programmable relay.Can be programmed (e.g.with a smartphone) to trigger an alarm or other events to trigger an alarm or other events. tradeinn Waveinn

SMART SOLAR CHARGE CONTROLLER: Solar charge the smart way with the Victron Energy BlueSolar MPPT charge controller, to ensure that every ray of available sunlight is converted into usable energy, while optimizing battery longevity. MAXIMIZE POWER OUTPUT: Lightning-fast optimum power point tracking and intelligent charge algorithms make sure you always get the maximum possible power output, even when your solar panels are partially shaded. MPPT SOLAR CHARGE CONTROLLER: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage REMOTE CONTROL: Remotely control and monitor the extensive features of your BlueSolar MPPT solar charge controller by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictronConnect NO BUILT-IN BLUETOOTH: The BlueSolar models require a Bluetooth dongle for wireless connectivity. If you prefer Bluetooth built-in, the SmartSolar range comes with it included.