Victron Energy Multiplus-ii 48/15000/200-100 Charger

Victron Energy Multiplus-ii 48/15000/200-100 Charger Blue . The Victron Energy Multiplus-II 48/15000/200-100 is a powerful, multifunctional inverter/charger ideal for professional marine, large vehicle, and off-grid applications. It combines MultiPlus and MultiGrid features, offering an optional external current transformer for advanced PowerControl and PowerAssist, optimizing self-consumption up to 100A. With its ESS functionality, anti-islanding, and two AC outputs (including a ´no-break´ main output), it ensures uninterrupted power even during blackouts. Easily configurable and remotely monitorable via GX products and VRM, this robust charger is built for reliability and flexibility. The MultiPlus-II 15000VA inverter/charger combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus and also gives you the option to install an external current transformer to enable PowerControl and PowerAssist to optimize self-consumption with external current sensing up to a maximum of 32A.It also has all the features of the MultiGrid.A MultiPlus, with ESS functionality (Energy Storage System) The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an optional external current sensor with which it extends the PowerControl and PowerAssist functions up to 50 A and 100 A respectively The MultiPlus-II is ideal for professional use in marine, recreational boating, large vehicles and off-grid land applications.It also has built-in anti-islanding functionality and approvals in more and more countries for use as ESS.Several system configurations are possible.More detailed information can be found in the ESS System Design, Data Sheet and Configuration Manual.PowerControl and PowerAssist - increase grid or generator capacity.You can set a maximum current of the generator or the grid The MultiPlus-II will take the other AC loads into account and use the excess current to charge the battery, thus avoiding overloading the generator or the grid (PowerControl function).PowerAssist takes the principle of PowerControl to another dimension.When a power peak is required for a short period of time, as is often the case.The MultiPlus-II will compensate for the lack of power from the generator.The shore power or the grid with power from the battery.When the load is reduced.The excess power is used to recharge the battery.Solar power:AC power available even during a blackout the MultiPlus II is suitable for photovoltaic systems, whe ther grid-connected or off-grid, and in other alternative energy systems.It is compatible with both solar charge controllers and grid-connected inverters.Two AC outputs the main output has a ´´no-break´´ function the MultiPlus II takes over the supply to the connected loads in the event of a blackout or disconnection of the port/generator outlet.This happens so quickly (less than 20 milliseconds) that computers and other electronic equipment continue to operate without interruption the second output is only active when the MultiPlus II input has AC power.Devices that should not discharge the battery, such as a water heater, can be connected to this output.On-site configuration, monitoring and control of the system.Configuration can be changed in a matter of minutes with the VEConfigure software (PC or laptop and MK3-USB interface required).Several monitoring and control options are available:Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, bluetooth (with optional VE.Bus Smart dongle), battery monitor, Digital Multi-Control panel.Remote configuration and monitoring install a Color Control GX or other GX product to connect to the Internet.Operating data can be displayed and stored free of charge on the VRM (Victron Remote Management) website.Once connected to the Internet, you can access the systems remotely and change the settings. tradeinn Waveinn