Vision Cs-1900p 6.5'' Ceiling Speaker

Vision Cs-1900p 6.5´´ Ceiling Speaker Golden One Size / EU Plug 220V. Experience invisible, professional-grade audio with the VISION CS-1900P ceiling speakers. Featuring a powerful 70W amplifier, Bluetooth connectivity with advanced pairing and auto-switching, and an intuitive IR remote for bass/treble control. Master/slave design with daisy-chaining capabilities supports multiple pairs. Enjoy superior sound with 2-way Kevlar woofers and silk tweeters. Auto-standby conserves power, and magnetic grilles ensure a sleek, easy installation with a 198mm cutout. Perfect for meeting spaces or home, offering a seamless audio solution. EU Plug included. EU Plug.The CS-1900P are based on Vision´s passive ceiling loudspeakers but have a powerful 70 watt amplifier built in.Easy to use and virtually invisible, these professional-grade loudspeakers are ideal for meeting spaces that can be divided, or at home.Bluetooth:- Easy to connect to.Bluetooth can be disabled via the remote control or RS-232.Rename Bluetooth, Set Pin:- Connect via USB and run software (see downloads tab) to rename and set the pin.The speakers stores the details for up.- to eight paired devices.Even if you change the PIN these eight devices will still connect without needing the new pin.When you pair a 9th device the 1st device will need to enter the password again to connect.Auto-Switching:- Choose to change to the Bluetooth input automatically when a device is paired, or manually switch.Remote Control:- An included IR remote control gives the user full control, including bass and treble adjustment.IR Front and Rear:- Switch between the front IR receiver, or the rear IR receiver if using a wired control system, or off.Master/Slave:- The amplifier is housed in the ``master´´ loudspeaker which has the connection panel, and a speaker output connects to the included passive ``slave´´ loudspeaker.Daisy-Chain:- If you require two pairs for the room an audio output allows you to pass the audio signal on to a second pair of CS-1900P.In fact you can daisy-chain as many pairs as you need using this line-level audio output.RS-232:- For integration into a controlled audio-visual environment they can be controlled with RS-232 (serial) codes.Vision´s Techconnect Control can be used to control them.Memory:- When power is turned on at the wall the CS-1900P automatically turn on and resumes the previous input and volume setting.2-Way with Kevlar Driver:- Two-way woofer and tweeter design with quality materials and a passive cross-over for superior audio.Auto-Standby:- If the amplifier senses no input for ten minutes it will automatically go into standby mode.Bluetooth device NOT PAIRED when it goes into standby:they will wake up when you pair a device or play audio though the line-level input.Bluetooth device PAIRED when it goes into standby:if the BT input was selected only the Bluetooth source will wake them up.If the line-level input was selected only a line-level input will wake them up.Automatic standby can be disabled with the remote control.Magnetic Grille:- The bezel-less grille clips into place once the speakers are secured.Simple to fit:- A cutout template is included so the installer can easily trace the cut line in the ceiling tile.Cut a 198 mm hole and fit the speaker.it´s quick and easy.Features:- Integrated 2 x 35 watt (RMS) amplifier.- 1 x wired input / 1 x Bluetooth input.- Switches between stand alone or daisy-chain mode.- IR remote included.- BT can be disabled.Specifications:- Loudspeaker Dimensions:232 X 95 Mm (diameter 224 Mm Without Grille).- Cutout Size:198 Mm.- Carton Dimensions:253 X 253 X 273 Mm.- Speaker Weight Master:1.3 Kg.- Speaker Weight Slave:1.2 Kg.- Carton Weight:4.0 Kg (per Pair).- Construction Material:Plastic (abs).- Amplifier Output:2 X 35 Watts (rms).- Woofer:6.5″ Kevlar.- Tweeter:0.5″ Silk.- Output Impedance:8 Ohms.- Sensitivity:89 Db (1w/1m).- Frequency Response:80 Hz-20 Khz.- Power Consumption:≤ 70 W.- Line-level Input:1 X 2-phono And 1 X 3.5mm Minijack (summed).- Speaker Output:Phoenix Connector.- Daisy-chain Input:3.5mm Minijack.- Daisy-chain Output:3.5mm Minijack Speaker Input:- Phoenix Connector Accessories Included:- 1 X Speaker Cable 5 M Long.- 1 X Remote Control (battery Included:Cr2025 3v Li-mn).- Power Supply:100-240v 50/60hz Ac External Power Supply - 24 Volt / 3 Amp.- Dc Tail Length:1.5m.- Transformer Dimensions:120 X 52 X 32 Mm. tradeinn Techinn