Volkel 804/034S 5mm x 0.8 HSS Tap (Set of 3)

Zoro Tools

Set of 3 HSS Ground taps for general use on non-abrasive materials up to 900 N/mm2 unalloyed and low alloyed steel, for through and blind holes, for thread cutting by hand or machine. 1 x Plug Tap 1 x Second Tap 1 x Taper Tap HSS Ground Taper Tap A taper tap has quite a lot of taper to help it ease into cutting threads gradually. Typically, the first 8 to 10 threads are tapered. Second Tap Second taps are in between plug and taper taps because they have 3-5 threads tapered, which is more than a plug tap and less than a taper tap. Plug Tap A plug tap has almost no taper at the end because it is designed to thread all the way to the bottom of its reach. Only 1 to 1.5 threads will be tapered. Plug taps are useful for threading blind holes. Its desirable to thread most of the

Amazon

Tap size - 5mm. Pitch - 0.8mm. Type - Tap set of 3 Völkel straight flute tap set of 3 for thread cutting by hand Manufactured from High Speed Steel (HSS) Precision made with ground threads and supplied in bright finish Square Size - 4.0mm