Wall & Ceiling PIR Motion Sensor Light Switch with Occupancy Photocell 10A 1 Gang Way Automatic Movement Corridor Storage Detector Loops

Covers 120 degrees within a 5 metre distance Time & Lux Adjustment - 1 - 16 mins - Night/Day Operation Quality Circuitry - Very Reliable With No False Activations Please note - 3 Terminals on back - Load in, Load out, Neutral (must always be connected). We also sell a PIR product with a switch on the faceplate for keeping a circuit constantly live or dead, please search through our shop. This PIR switch is ideal for areas where lights and/or a fan are only required when the area is occupied. It works by detecting and monitoring body heat in an area, when the area becomes vacant, the switch will go off after a chosen duration (1-16 minutes). Perfect for use in toilets, warehouses and corridors to reduce the amount of electricity used and save money on energy bills. It is suitable for use with fluorescent lights, incandescent lamps, energy saving lamps or fans. This light switch can be used as a replacement or new switch with a 250V rated consumer unit (fuse box) as found in most UK houses. It can be used with a standard single back box and requires a 25mm depth as a minimum. If required more than one of these PIR switches can be linked in parallel to make a circuit live, this could be useful at the top and bottom of a stair case. OCCUPANCY SENESOR - Unlike standard PIR sensors, this switch will reset whatever timer you have programmed when motion is detected. This will keep your lights on when you're in range and stops you needed to activate the sensor each time the timer runs out., Manufacturer: Loops