Wall Mounted Controller, For Dual White CCT LED Products, Mains Powered

Wall-Mounted Dual White CCT LED Controller for Precise Lighting Control Why flick the light switch when you can manage your lights with a remote control ? But who wants a handheld remote control that you could easily lose between the sofa cushions? Yes, that’s why we have this wall-mounted dual white CCT LED controller . It’s a level-up replacement for your light switches, and a more practical choice over the remote control. You can use this device to control your lights precisely, not just to turn on and off, but also to adjust their colour temperature and brightness (dimming). Just make sure that your lights have the dimming and colour-tunable functions. Remember that not all lights are made equal! Using incompatible fittings will only give you headaches instead of good lighting. Four-Zone Control for Customised Lighting in Every Space If you look closely at the controller, you’ll see the numbers one through four. These numbers aren’t just for decoration, but rather, they signify the four zones that you can set, pair, and control using this wall-mounted LED controller. Yes, you can control the colour temperature and the brightness of four areas separately… in one device. But hey, the zones don’t have to be strictly within four separate rooms. Different zones can be in the same room, but different areas, like your ceiling lights and wall lights, can be two different “zones”. The freedom is yours! It would also serve you well to remember that this controller is only compatible with low-voltage LED lights like strips, under-cabinet lights, plinth lights, etc. Mains-Powered Design for Reliable and Continuous Operation A battery-powered version of this wall-mounted LED controller is available, offering portability and ease of installation. However, what that means is you have to remember to replace the batteries every now and then. That’s why this controller is mains-wired for a more continuous operation. And on the topic of ease of installation? This controller is actually pretty easy to install into an existing backbox. Just make sure you get a qualified electrician to help you install the lights and accessories properly if you’re not qualified. Safety should always be your priority when working with electricity. This controller is also rated IP20 , so only install this within the dry areas of your home. Sleek Tempered Glass Front for Modern Interiors You know what they say: modern homes need modern wall-mounted controllers… or something on the same line. And that’s exactly what this controller is. Whether you’re going for Bohemian, Minimalist, Mid-century modern, or other styles, the sleek white finish of this device will help complement your interior. It also features a tempered glass front that makes controlling your lights easy. It’s like tapping on a phone screen: smooth, fast, and satisfying. However, more than that, the controller also features a low-profile design, with dimensions of only 86mm x 86mm for height and width, and a depth of 33mm . This means that this controller will be visible, but won’t get attention for itself. Adjustable Brightness and Colour Temperature for Every Mood Let’s talk controls. The top-most “coloured” bars allows you to change the colour temperature of your CCT-tunable lights. A quick slide to the left will gain more warmth, while a slide to the right will transition to a cooler shade. The same is true with the less colourful group of bars below, which is used to adjust the brightness of your lights. Simply swipe to the left to dim your lights, and swipe right to brighten them. Having complete control over your fixture has never been this fun and easy. And what adds to the overall experience is the fact that you don’t have to worry about the controller since it’s backed by a 2-year warranty . That should allow you to enjoy your light control to the fullest. Easy Installation with Compatible LED Modules for Full Flexibility This is important to remember: You cannot dim the normal mains lighting products (despite being dimmable) and non-dimmable low-voltage LEDs with this controller. But that doesn’t mean that you don’t have a wide selection of lights you can pair and control using this device. Quite the contrary, actually. Simple Lighting offers a vast collection of LED strip lights, under-cabinet LED lights, and other low-voltage LEDs that are compatible with this controller. All you have to do? Check out the rest of the website. Remember that for each zone you pair, you’ll need its own LED controller module . Otherwise, you will not be able to pair and control that zone. These modules are sold separately, so make sure to go through them out before you check out.

4 ZONE DUAL WHITE CONTROL. Adjust colour temperature and brightness on dual white LED lights in four separate zones. A zone can be a room or one area of a room, such as ceiling lights and wall lights, each set on its own. MAINS POWERED, NO BATTERIES. The controller is wired to the 220-240v mains, so it never needs batteries and stays on the wall like a switch. A qualified electrician should fit it. Receivers for each zone are sold separately. FOR LOW-VOLTAGE LED LIGHTS. Works with low-voltage LED lights such as strips, under-cabinet lights and plinth lights through a colour temperature receiver per zone. Your lights must be dimmable and colour tunable to work with it. WHITE GLASS FRONT. The numbers one to four on the glass show the four zones. A flat white glass panel in place of switches and handheld remotes, so nothing gets lost down the sofa. The panel is 86 x 86mm and wipes clean. IP20 INDOOR USE, 2-YEAR WARRANTY. Rated IP20, so use it in dry indoor rooms only, not bathrooms or outdoors. Receivers, drivers and LED lights are sold separately. Warranty: 2 Years from Simple Lighting UK.