£ 13.99
Washing Machine Waste Splitter, 40 mm Y Drain Connector with 18 to 24 Hose Tails and 2 Clips for Dishwasher, Washer Under Sink Plumbing
Prices from
13.99
Sponsored links
|
|
£ 13.99 |
To Shop
|
| COMPARE ALL WEBSHOPS (1) | ||
Description
Amazon
Two Appliance Connection: Connect two compatible appliance drain hoses to one suitable waste outlet using a single compact branch fitting. The set includes 1 Y connector and 2 stainless steel hose clips, making it useful for a washing machine, dishwasher or condenser dryer drain hose in kitchens, utility rooms and under sink cupboards where the receiving connection matches. Check Every Size: The body measures approximately 9.5 cm wide and 8.3 cm high. Both stepped hose tails have outer diameters from 18 to 24 mm, the lower round outlet measures about 40 mm across the outside, and the clips adjust from 20 to 30 mm. Measure the hose inner diameter, receiving fitting and available space before ordering. Stepped Hose Tails: Push each compatible drain hose fully over the ribbed stepped tail, then position a supplied clip over the contact area and tighten it evenly without crushing the hose. The graduated shape supports several matching hose openings within the stated range, while the two separate clips help hold both appliance lines in position during normal drainage. Compact Y Layout: The angled branch brings two hose connections towards one shared outlet while keeping the assembly compact for confined plumbing spaces. Route both hoses without sharp bends, support them where needed and maintain the fall required by the existing installation. The connector does not contain a non return valve, so correct pipe layout remains important. Measured Installation: The moulded ABS fitting is intended only for pipework that matches the stated diameters and connection form. It is not described as universal and may not suit bayonet, threaded, oval, click lock or damaged fittings. Test each appliance connection separately after installation and inspect every joint before routine use.
Compare webshops (1)
Sponsored links · Some shops pay us a fee
Sort by:
Shops with other sizes
Description
(1)
Two Appliance Connection: Connect two compatible appliance drain hoses to one suitable waste outlet using a single compact branch fitting. The set includes 1 Y connector and 2 stainless steel hose clips, making it useful for a washing machine, dishwasher or condenser dryer drain hose in kitchens, utility rooms and under sink cupboards where the receiving connection matches. Check Every Size: The body measures approximately 9.5 cm wide and 8.3 cm high. Both stepped hose tails have outer diameters from 18 to 24 mm, the lower round outlet measures about 40 mm across the outside, and the clips adjust from 20 to 30 mm. Measure the hose inner diameter, receiving fitting and available space before ordering. Stepped Hose Tails: Push each compatible drain hose fully over the ribbed stepped tail, then position a supplied clip over the contact area and tighten it evenly without crushing the hose. The graduated shape supports several matching hose openings within the stated range, while the two separate clips help hold both appliance lines in position during normal drainage. Compact Y Layout: The angled branch brings two hose connections towards one shared outlet while keeping the assembly compact for confined plumbing spaces. Route both hoses without sharp bends, support them where needed and maintain the fall required by the existing installation. The connector does not contain a non return valve, so correct pipe layout remains important. Measured Installation: The moulded ABS fitting is intended only for pipework that matches the stated diameters and connection form. It is not described as universal and may not suit bayonet, threaded, oval, click lock or damaged fittings. Test each appliance connection separately after installation and inspect every joint before routine use.
Product specifications
Related results
Featured Choice
£ 13.99
