Compare webshops (1)
Sponsored links · Some shops pay us a fee
Shops with other sizes
The set contains 10 m of hook tape and 10 m of matching loop tape, both 30 mm wide and white. Sew one strip to each side of an opening for 10 m of finished fastening. For shorter closures, cut the two strips into equal lengths so each hook section has a matching loop section. The hook face feels rougher to the touch, while the loop face is soft. On a cuff, flap or removable cover, put the loop strip on the side that may brush against skin or snag nearby fabric when open. Press the two faces together along their length to close. The nylon tape has a plain back for stitching directly to fabric. Lay each strip with its fastening face out and hold it in position with clips or pins. Stitch around the edges, keeping the opening clear so the two sides can still be peeled apart. Allow 30 mm of clear fabric on each side of the opening. The strip fits pocket flaps and fabric tabs. Measure the flap where it actually overlaps the pocket, allowing for any seams, so the hooks stay covered when the flap closes. For a batch of bags or covers, make up one closure first to check the overlap. Use that length to mark out the remaining hook and loop strips. Cut the pieces in pairs so each flap has a matching section when you come to sew it.