Yeti LTe C2 Factory

The Yeti LTe C2 Factory combines a TURQ carbon frame and Sixfinity suspension with Bosch Performance Line CX power and an 800Wh battery. Fox Factory suspension, SRAM 1x12 gearing and gravity-focused tyres equip it for demanding e-MTB riding.Key Features:TURQ Series carbon frame with Sixfinity suspension and 12x148mm Boost rear axleFox 38 Factory GRIP X2 fork with 170mm travelFox Float X2 Factory shock controls the Sixfinity rear suspensionSRAM Eagle 90 1x12 drivetrain with GX 10-52T cassette and chainSRAM Maven Base hydraulic disc brakesDT Swiss H1900 wheels with 2.5in Schwalbe Gravity Pro tyresSize-specific Crankbrothers Highline dropper with up to 200mm travelAvailable with 0% APR financeDrive Information:Motor: Bosch Performance Line CX BDU384YBattery: Bosch PowerTube 800WhUser Interface: Bosch Kiox 400C displayThe Yeti LTe C2 Factory is a full-power enduro e-MTB built around Yeti's TURQ Series carbon frame and Sixfinity suspension platform. Its combination of long-travel Fox Factory suspension, Bosch assistance and an 800Wh battery is aimed at riders tackling technical trails, sustained climbs and demanding descents.The TURQ Series carbon fibre frame uses Yeti's Sixfinity suspension system, with the Bosch PowerTube battery and Performance Line CX motor incorporated into the chassis. Internally routed cables keep the frame tidy, while the rear uses a 12x148mm Boost axle and Universal Derailleur Hanger.A Fox 38 Factory fork provides 170mm of front travel. The GRIP X2 damper offers extensive adjustment for riders who want to tune suspension behaviour to their weight, riding style and terrain, while the substantial 38mm chassis suits the LTe's gravity-focused intentions.At the rear, a Fox Float X2 Factory shock controls Yeti's Sixfinity suspension platform. The supplied specification doesn't state the LTe's rear-wheel travel, so I've avoided adding a figure that isn't supported by the information provided.Power comes from a Bosch Performance Line CX BDU384Y mid-drive motor. It works with the bike's drivetrain to provide assistance while pedalling, giving riders support for steep climbs and longer days with plenty of elevation.The Bosch PowerTube 800Wh battery provides a high-capacity power source for the drive system. Actual riding range will depend on factors including assistance mode, terrain, climbing, rider weight, tyre pressures and weather conditions.A Bosch Kiox 400C provides the user interface. The colour display is integrated into the top tube, keeping ride and assistance information positioned neatly within the bike rather than adding a separate handlebar-mounted display.SRAM components provide a 1x12 drivetrain. Eagle 90 shifting is paired with a wide-range SRAM GX 10-52T cassette and GX chain, providing a broad spread of gears for tackling steep climbs and carrying speed across varied terrain.A SRAM GX crankset uses short 155mm crank arms. The reduced crank length provides additional pedal clearance, which is particularly useful when pedalling an e-MTB through rocky and uneven sections of trail.SRAM Maven Base hydraulic disc brakes handle stopping duties. The Maven platform is designed for demanding mountain bike use, complementing the LTe's long-travel suspension and gravity-focused component selection.DT Swiss H1900 wheels use 30mm-wide rims and are designed for e-MTB use. They're paired with high-volume 2.5in Schwalbe tyres at both ends, with different compounds selected to suit their position on the bike.At the front, a Schwalbe Magic Mary Gravity Pro uses Radial construction and Ultra Soft compound to prioritise grip and control. The rear Schwalbe Tacky Chan Gravity Pro also uses Radial construction, paired with a Soft compound.A Crankbrothers Highline dropper post provides travel matched to frame size. Small frames receive 150mm travel, Medium gets 170mm, while Large and XL use 200mm, helping give riders appropriate saddle clearance on steep and technical descents.The cockpit combines a 780mm-wide Burgtec Ride Wide alloy Enduro handlebar with 30mm rise and a Burgtec Enduro MK3 50mm stem. A WTB Solano saddle with chromoly rails completes the contact points.Overall, the Yeti LTe C2 Factory brings together a TURQ carbon chassis, Sixfinity suspension, 170mm Fox Factory fork and Bosch-powered assistance in an enduro-focused package. Its 800Wh battery, wide-range drivetrain and gravity-oriented tyres make it particularly suited to riders looking to cover technical terrain with plenty of climbing and descending.Note: the supplied specification identifies the motor as Bosch Performance Line CX BDU384Y but doesn't provide a maximum torque figure. I've therefore left torque out rather than adding a figure that isn't supported by the supplied information.