Compare webshops (1)
Each of the 8 LED arms fires through its own high-transmission Fresnel lens at a razor-sharp 4° beam angle — not the wide 30° wash you get from most spider lights. Run chasing sequences across 8 beams, split colors left and right, or strobe all 8 in sync. Every arm carries its own red, green, blue, and white emitter, so you control arm-level color independently via DMX, not just a global color wheel. Add haze or fog and the beams turn into solid columns of moving color that cut through ambient light. The chassis is formed from painted iron with aluminum-alloy cooling tubes — not the all-ABS plastic shells that dominate this price range. The extra weight keeps the base anchored when arms sweep at speed. The metal frame dissipates heat through multi-hour gigs without softening or warping. Aluminum tubes also protect the internal LEDs better than plastic housings, so the fixture holds alignment through transport and setup. For mobile DJs who move gear three times a weekend, a metal spider survives what a plastic one doesn't. Plug in and sound-active mode reads the room immediately — the built-in microphone syncs beam sweeps, color jumps, and strobe to the beat with sensitivity adjustable from 0 to 100. Auto mode cycles through 25 pre-programmed sequences for set-and-forget background lighting. Link multiple units via a single DMX cable for instant master-slave synchronization across your entire rig. Full DMX512 support gives you 10 or 14 channels per fixture — independent per-arm color, strobe rate, dimming, and movement pattern selection from any standard console. The long, slim body clamps to truss, mounts on lightweight stands, or sits on tabletops without dominating the stage. At just 4.4 pounds, one hand carries it — two hands carry your entire spider rig. The included bracket and pre-installed bottom screws mean you're mounted and running in under 5 minutes. Center-stage placement makes a statement with one light. Two on opposite corners flood the room in synchronized color. Three or more and you have a club-level beam show at a fraction of pro-fixture cost. We rate this fixture at an honest 8×3W because that's what the LEDs actually draw — no inflated numbers, no imaginary watts. The Fresnel lens technology is the same optical principle used in professional theater spots, and the iron-and-aluminum construction comes from the same production line as our higher-powered moving head lineup. Every unit includes 1× spider beam fixture, 1× mounting bracket, 1× power cable, 1× user manual, and 2× pre-installed screws. 1-year warranty with US-based support. DMX cable sold separately.