AITRIP 3PCS GY 291 ADXL345 Digital 3 Axis Acceleration of Gravity Tilt Module IIC SPI for Arduino

ADXL345 is very suitable for mobile device applications. It can be used for tilt sensing applications while measuring static acceleration of gravity, and it can also measure the speed of vibration caused by dynamic added motion or caused. With its high resolution (4mg/LSB), it can measure changes in the inclination angle of about 0.25°. Use ADXL345 digital output timing acceleration, etc., no timing According to the 16-bit two's complement format, it can be accessed through the digital interface SPI (3-wire or 4-wire) or I2C ADXL345 is a small, thin, low-power three-axis accelerometer can be high. Up to ± 16 g accelerometer with high resolution (13) measurements. Digital outputs according to a 16-bit twos complement format, can be accessed through the digital interface SPI (3-wire or 4-wire) or I2C. Low power modes enable intelligent motion-based power management to a very low power consumption threshold sensing and active acceleration measurement. With high resolution (13 bits) measurement up to ±16g. The digital output data is in 16-bit two-valued complement format, which can be passed through the I2C digital interface SPI (3-wire or 4-wire)