BBB Cycling FlipHead Pro Bike Pump Accessory High end Aluminium Pumphead Replacement Compatible With Presta, Schrader and Dunlop 120 cm Pressure Hose BFP 99

Bbb Fliphead Pro Hose. Tired of struggling with your pump head? The BBB FlipHead Pro hose makes inflation effortless. Its innovative reverse lever mechanism allows for easy, one-handed attachment and removal from the valve, so you can say goodbye to trapped fingers and painful lever slams. The high-quality aluminum head instantly flips to fit Presta, Schrader, and Dunlop valves, while the extra-long 120cm hose provides superior reach. Upgrade your floor pump for a secure, comfortable, and powerful inflation experience every time. The pumping part is not the hardest, it is putting the pump head on your valve and taking it off. Your fingers van het stuck, or the lever slams your hand. The new Flip Head Pro continues where it´s predecessor had left and solves all these problems. with a reverse lever mechanism, the lever is easy to handle even with one hand so you´ve got the other one free to hold the pump or tire. Also taking off the the pump head head can be done with only one hand, and the lever won´t slam into your hand while taking it off. The high quality aluminium head easily flips around between Dunlop and Presta to Schrader and has a long reach due to it´s 120cm long hose.The basic material we use to make a bicycle pump determines to a large extent the pump´s properties. Our bicycle pumps are made of three different materials: aluminium, steel, and composite.Aluminium:- Bicycle pumps made of aluminium are strong, light, and durable. The material is highly resistant to rust and is lighter than steel, making an aluminium pump ideal for use on the road.Steel:- Pumps made of steel are very strong but can also be quite heavy and the material is less resistant to rust. It is, therefore, less suitable for a pump you want to take with you.Composite:- Composite bicycle pumps are lightweight and relatively cheap, but that´s partly because they have a somewhat shorter lifespan. The material is less strong, so they provide less pumping pressure than pumps made of steel or aluminium.Presta valve:- The Presta valve (also known as the French valve) is mainly used on road and touring bikes. When inflating an innertube with this valve you need to open the valve by unscrewing the nipple on top.Schrader valve:- The Schrader valve (also known as the automotive valve) is mainly used in cars. The type of bikes that make use of these valves are mountain bikes and other kinds of bikes with wide tires. This type of valve makes it easy to inflate your tube at a gas station without any use of extenders or adapters.Dunlop valve:- The Dunlop valve (also known as the Dutch valve) is known for its wide usage in the Netherlands. Most urban bicycles and e-bikes in the Netherlands (as well as in other countries) use this type of valve. You can use any floor pump to inflate innertubes with this valve.High pressure:- A high-pressure pump has a narrow air chamber, enabling it to generate high pump pressure. A high-pressure pump is ideally suited for thin tires that need to be inflated hard. You can also use a pump like this for wider tires, but then you have to pump a bit longer before the tire reaches the desired pressure as the pump volume is slightly lower.High volume:- A high-volume pump has a wider air chamber so you don´t have to pump as long to get a lot of air in the tire. A high volume pump is ideal for wider tires, such as mountain bike and city bike tires. But it can certainly be used for racing bike tires too. However, you will have to make more effort to achieve high tire pressure.Twist head:- For an extra secure grip, check out the Twist Head. This pump head is ready to be screwed on your valve, so that, even at higher pressures, it just stays in place and won't come off.Dual Head 2.0:- The Dual Head 2.0 is compatible with all our floor pumps. Because of its metal handle it won´t break and is easy to use and can handle high pressure.Dual Head 3.0:- The Dual Head 3.0 pump head has a thum block lever that gives you the possibility to secure it to the valve with only one hand. The pump head locks firmly to the valve, so you can pump it with high pressure.Features: - High-end aluminum Flip Head for bicycle pumps- 120 cm high pressure hose- Easy to use thum block leverSpecifications:- Material: Aluminium, Composite- Compatible valves: Dunlop, Presta/French, Schrader/Automotive- Pressure type: High pressure, High volume- Type pump head: Flip head Pro- Weight (g): 250Technology:Flip Head Pro:- The innovative Flip Head Pro pump head makes pumping easier. Its reverse lever mechanism ensures effortless, one-handed attachment and detachment from your valve without painful slams. It flips between valve types for a comfortable, powerful pumping experience. Upgrade your pump for added convenience and efficiency. tradeinn Bikeinn

PUMPHEAD REPLACEMENT: our FlipHead Pro is the ideal replacement part for your floor pump if you are lookiing for a high pressure pumphead with hose COMPATIBILITY: the high quality aluminium head easily flips around between Dunlop and Presta to Schrader REVERSE LEVER MECHANISM: the lever is easy to handle even with one hand so you can hold the pump or tire NO AIR LEAKAGE: thanks to the thumb lock lever which ensures the pump with a secure seal ABOUT BBB CYCLING: We are offering more than 1.500 unique products and bike accessories, all designed within the walls of the BBB headquarters in The Hague, the Netherlands.