Black Round Roller Shutter Winch End of Run 6 Sided Inlet 7 mm Square Female Outlet Diameter 8 Steel Pulley Mechanism for Shutters and Crank Drive

6p7 8mm square winch - The winch is a piece that allows you to rotate the winding tube of the apron. It is the mechanism that operates the rise or down of the shutter, via a crank. This part is essential to ensure the connection between the crank and the shutter axis. Installation Tips: First open your shutter boot. Remember to pull the cover off the shutter (the blades) so you can manoeuvre in the boot and access the axle. The winch is located on the side of the mechanism. Separate the rod from the box outlet from the winch. Remove the winding axis from the winch. Now you can replace the winch with a new one, reattach the axle and box outlet, then wind the apron by hand and close the trunk. ✅ Thanks to its carbonitrised steel and fibreglass, the square winch of 8 is durable and long-lasting. It is also a robust and high-quality product made in France. Black ✅ A central piece for the joint and the safety of your shutters, this highly resistant ball joint can withstand many shutters training, with a lifting capacity of up to 17 kg. It also has a 11 turn capacity running end. Technical information: This drive winch is 8 cm in diameter and 2 cm thick. It is a system with an inlet form to the 7 mm hexagonal crank (octagonal hole). It fits 8mm square outlets. Comes in one piece, no additional spare parts., Manufacturer: Zurflüh-Feller