Bond It Aqua Tile D2 Waterproof Ready Mix Wall Adhesive (7.5)

AQUA-TILE is suitable for fixing all types of ceramic wall tiles, including mosaics and vitrified tiles. Ideal for internal locations such as bathrooms, kitchens and shower areas. AQUA-TILE can be applied to gypsum plaster, cement fibreboard, existing tiles, cement render, concrete block work, timber panels and plywood composite boards. The substrate must be clean, structurally sound and free from dust, oil, grease and loose flaking coatings. The surface must also be sufficiently flat not to require an adhesive thickness of more than 3mm. AQUA-TILE should be applied using a notched trowel (5mm x 5mm @ 10-25mm centers) to give a ribbed bed on the wall surface, into which the tiles are firmly bedded with a twist and slide action to ensure full contact. Final set will occur after 24-72 hours. However, drying times will be extended on impervious surfaces. AQUA-TILE should not be applied onto walls affected by penetrating damp, or when room temperature is below 5oC.