Bond It Tanking Slurry Grey 20Kg Bucket Tub Waterproofer Damp Proofing Masonry Cement retaining walls, and tanks

Suitable for use with; brick, stone, and concrete surfaces. It is recommended sources of water and damp are removed. A damp PROof course should be employed. All contact surfaces must be clean and sound, and free from dust, grease particles and loose material or previous coatings. The surface must be prepared using abrasive tools, jet washing or wire brushing and any debris removed with clean water. Tap off water pressure where necessary insert a fillet at floor and wall joint. Running water and surface defects, such as holes, cracks or fractures should be filled with Bond It PLUG IT. PLUG IT can be over coated with TANKING SLURRY as soon as it is cool and dry to the touch. Under normal applications no priming is required. For difficult surfaces Bond It EXTERIOR PREGRIT or SBR ADMIXTURE may be applied as a primer coat. Seal around all services and pipes with Bond It GRIPBOND PRO HYBRID SEALANT. The water requirement to produce the coating is 5 Litres of clean water per 20Kg of dry material.Pour the required quantity of water into suitable mixing bucket / container. Slowly add the powder to the water whilst continuously mixing with a mechanical paddle / stirrer.