colorFabb LW PLA Black 1.75/750 8719033556775 3D Print Filaments

Experience a breakthrough in lightweight 3D printing with ColorFabb LW-PLA. This filament expands during extrusion, reducing weight by up to 65% without sacrificing strength. Perfect for RC planes, drones, cosplay props, and any project that benefits from reduced mass. Print effortlessly with stable layer adhesion and low stringing. For best results, start at 230–250°C and adjust flow to achieve the desired foaming effect. Lower flow equals lighter parts. With LW-PLA, you print stronger, lighter, and smarter — optimizing your designs for true performance. Take full control over your print density using ColorFabb LW-PLA’s unique foaming behavior. By tuning temperature and flow, you can create lightweight or solid parts from the same spool. This makes it ideal for functional prototypes, model aircraft, and engineering applications. Enjoy reduced filament usage and shorter print times while maintaining precise details. For the best surface finish, enable retraction and reduce travel moves. LW-PLA empowers every maker to achieve professional, high-efficiency prints with precision and reliability. Material: LW-PLA (Lightweight PLA) Diameter tolerance: ±0.05 mm Glass transition temp: 60°C Recommended nozzle temp: 230–250°C Bed temp: 50–60°C Print speed: 35–55 mm/s Density reduction: Up to 65% For best results, dry filament before printing and store in a sealed container. Adjust flow rate between 60–100% to fine-tune weight and surface finish. LW-PLA delivers reliable extrusion, smooth layers, and stunning lightweight results for any creative or functional project.

This black LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament has a diameter of 1.75mm and provides a matte finish. The filament starts to foam at about 230 graden, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.Print recommendation for colorFabb LW-PLA (lightweight PLA):Print temperature: 195 graden to 260 gradenHeated bed temperature: 50 graden to 60 graden (optional)Print speed: 40mm/s to 100mm/sPart cooling: offPlease note: due to the foaming technique, the colour may vary.