colorFabb LW PLA Yellow 1.75/750 8720039152595 3D Print Filaments
Featured
|
£ 28.50 |
To Shop
|
Description
123-3D UK
This yellow LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The yellow filament has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.Print recommendation for colorFabb LW-PLA (light weight PLA):print temperature: 195 to 260°Cheated bed temperature: 50 to 60 (optional)print speed: 40 to 100 mm/spart cooling: offPlease note: due to the foaming technique, the colour may vary.
Compare webshops (1)
Description
(1)
This yellow LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The yellow filament has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.Print recommendation for colorFabb LW-PLA (light weight PLA):print temperature: 195 to 260°Cheated bed temperature: 50 to 60 (optional)print speed: 40 to 100 mm/spart cooling: offPlease note: due to the foaming technique, the colour may vary.
Product specificationsPrices were last updated on:
Related products
